Unsolved
This post is more than 5 years old
2 Posts
0
2020
SCv2000 "One iSCSI Network with Dual 1 GbE 4-Port Storage Controllers" - vSphere Design Guidance?
Given the "One iSCSI Network with Dual 1 GbE 4-Port Storage Controllers" design described in the Dell Storage Center SCv2000 and SCv2020 Storage System Deployment Guide (page 47), what is Dell's generally recommended iSCSI design (including vSwitch layer) for a 2-node vSphere 6.x HA cluster using VMware's software-based iSCSI initiator?
For the vSwitch layer, I'm primarily interested in high-level design guidance regarding the number of iSCSI vSwitches per host and iSCSI port binding recommendations.
If feasible, please include an example iSCSI IP address config (SCv2000 fault domains and vSwitch layer) in your reply.
Otherwise, please just share any insights that you have about the subject.
DELL-Sam L
Moderator
Moderator
•
7.1K Posts
0
June 5th, 2017 09:00
Hello MLH20,
Here is a link to our Best Practices guide for VSphere 5.x-6.x for your SC2000. http://en.community.dell.com/techcenter/extras/m/white_papers/20441056
Please let us know if you have any other questions.
just.dave
29 Posts
1
June 22nd, 2017 13:00
You would want 2 ISCSI Subnets, one for each Fault Domain, don't bind the NICS to the ISCSI software HBA. Use Round Robin as your pathing policy, have both fault domain IP's in the ISCSI software HBA Discovery field, disable Delayed Ack, set ISCSI login Timeout to 60 seconds and you should be good.
Example for a host:
ISCSI Vswitch 1: vmk 10.10.10.1
ISCSI Vswitch 2: vmk 10.10.20.1
Example of SCV2000 Fault Domains:
Ports 1 & 3 are hard coded to FD1, and ports 2 & 4 are hard coded for FD2
FD1 Discovery IP: 10.10.10.100
top/left controller ISCSI port 1 IP 10.10.10.101
top/left controller ISCSI port 3 IP 10.10.10.102
bottom/right controller ISCSI port 1 IP 10.10.10.103
bottom/right controller ISCSI port 3 IP 10.10.10.104
FD2 Discovery IP: 10.10.20.100
top/left controller ISCSI port 2 IP 10.10.20.101
top/left controller ISCSI port 4 IP 10.10.20.102
bottom/right controller ISCSI port 2 IP 10.10.20.103
bottom/right controller ISCSI port 4 IP 10.10.20.10