Hi ZaidWong,

To utilize Intel Smart Response Technology in Windows 8, the BIOS mode should be in UEFI. Please follow the below mentioned steps to reinstall Windows 8 with Intel Smart Response Technology:

1. Ensure to first back up any data on the computer.
2. Download and save Intel Rapid Storage Technology drivers using the following link: http://dell.to/12gomHC
3. Copy the downloaded file to a USB flash drive/memory stick.
4. Restart the computer and tap F2 key at Dell logo to enter the BIOS.
5. Change the SATA Operating from AHCI to Intel Smart Response Technology.
6. Press F10 to save the changes, exit BIOS, and initiate Windows 8 installation using the install media that you have got.
7. At the screen where you are prompted to select install location, connect the USB flash drive to the computer.
8. Click Load drivers and browse to the folder on the USB flash drive that contains the drivers, and continue with the installation.
9. Once the reinstallation is completed, install all the drivers.
10. Refer the following link for the instructions to install drivers in correct order: http://dell.to/Ynnsnr
11. Once the drivers are installed, refer the following link to configure Intel Smart Response Technology: http://dell.to/13Cfdsw

Please post the results.

I've installed the driver and it said... I mustahil Load drive for 32bit but signifikan the 64 drive... Coz it cant instill unsigned 64bit..i don't understand that

And i have done all the instruction u asked.... The windows is instill.. But it crash... It says "operating system could not be loaded Because a criticall system drive is missing or continue errors...

File:\windows \system32\driver\iaStorA.sys

Error code: 0xc0000359

Hi ZaidWong,

I have responded to your private message. Kindly check and let me know the requested information.