This post is more than 5 years old
4 Posts
0
74959
Inspiron E1505/6400 MD666 & YD612 Question
Hello, I have a Inspiron 6400 with motherboard MD666 ( its failing) a Friend gave me a YD612 motherboard to my dismay once I disassembled my laptop I saw that where the lcd ribbon plugs into the mobo there isnt a plug for it on the mobo and theres a PCI slot. So after reading I realized I must buy the ATI X1400 Vd card. My question is, is that ALL that is different on these mobo's? and what happens with the LCD/Display ribbon/wire? I dont wanna Purchase the vd card to find out i have to yet again buy other parts etc.
2) what is the higest available CPU upgrade I can buy for this Mobo ( YD612) and the name of it so i can search Ebay.
Thanks so Much.
C.H
ejn63
9 Legend
9 Legend
•
87.5K Posts
1
August 13th, 2011 15:00
You cannot use a T9500 in that system You can only use the T7200, T7400 and T7600 - those are the fastest of the generation of CPUs supported by this system.
The newer Penryn CPUs will NOT work - the socket is the same but the pin assignments differ.
800 MHz FSB CPUs are NOT supported. 667 is the max.
ejn63
9 Legend
9 Legend
•
87.5K Posts
0
June 3rd, 2010 16:00
You may need a new ribbon cable. The system will take any Core 2 Duo on an 800 MHz bus (but NOT on the 1066 MHz). The T9500 is the fastest of these -- though it will run you $300-400 , which is more than the system is likely worth (and the CPU will far outstrip the video card's ability - so go for a more modest upgrade).
IrishGalTor
4 Posts
0
June 3rd, 2010 17:00
If you compare the Mobo's you'll see that where the lcd cable plugs into the mobo on the MD666 is not present on the Yd612 mobo...( or at least i cant find it)
IrishGalTor
4 Posts
0
June 3rd, 2010 17:00
Thanks. When I look at the several Video cards on sale online. there is a place to * snap* it onto the mobo but NO wires/cables/ribbons.
So does this mean the plug coming out of the LCD display will just sit unplugged?
ejn63
9 Legend
9 Legend
•
87.5K Posts
0
June 3rd, 2010 17:00
No - video card or integrated, the LCD plugs into the mainboard.
ejn63
9 Legend
9 Legend
•
87.5K Posts
0
June 3rd, 2010 18:00
It does look like the display connector is on the video card itself for this model.
IrishGalTor
4 Posts
0
June 3rd, 2010 18:00
I managed to google xtra large photo of the vid card showing both sides and Correct it does * appear* that the lcd cable plugs into the vid card!
Thanks!!! :):emotion-21:
settholo
1 Message
0
August 13th, 2011 14:00
Hi all, I have a dell inspiron 6400 purchased in 2007. It has the x1400, t7200 cpu, pm945 and ich7. I don't know the code of the mainboard, disassembled several times but never looked for. I can't get if i can upgrade my system with a t9500 cpu. On intel site 7200 and t9500 share the PPGA478 socket type, fsb il 800 MHz which should be good. Does someone can help me understandig this?
Thanks!!!
Inspiron 64OO
1 Message
0
September 7th, 2011 06:00
Hello i have inspiron 6400 with i think MD666. I have Intel T2050 and GM945 On-board video. I will upgrade my CPU for Win7 (64-bit). Can you give me please Lits with compatible CPUs for this Motherboard? Or, can i install 667MHz CPU?