Unsolved
This post is more than 5 years old
1 Rookie
•
7 Posts
0
18733
March 29th, 2016 15:00
Latitude e6440 not Booting after memory upgrade
I attempted to upgrade from 4gb Memory to 8gb of memory. After installing the additional memory module, the laptop would not boot. It would power on for a moment the shut off. I get error lights (left to right) Solid, Blinking, Solid.
Install the original 4gb Stick, and the laptop boots. I switched to a single 8gb stick with the same failed results. I tested the memory in a different laptop with no issues.
I have now seen this on 3 separate machines, one of which had to be sent to the Depot for repairs.
Dell e6440, Intel Core i5, Win 7 ENT 64bit
Memory: DDR3-1600 PC3 (both in 4gb and 8gb Sticks)
No Events found!
DELL-Akshatha M
2 Intern
•
1.2K Posts
0
March 30th, 2016 01:00
Hi LETSGIVETHISASHOT,
Thank you for writing to Dell Community Forum.
The E6440 system supports the Memory module capacities: 1GB, 2GB, 4GB, or 8GB
The memory type would be : DDR3L SDRAM (1600 MHz)
Maximum memory supported: 16GB
Do let us know if you have any more queries.
Regards,
DELL-Akshatha M
Social Media and Community Professional
#IWork4Dell
ingjaime
3 Posts
0
September 28th, 2017 11:00
I bought this module Dell 8 GB Certified Replacement Memory Module for Select Dell Systems 1600MHz LV Manufacturer Part SNPN2M64C/8G Dell Part A7022339for you webapge and I have the same exact issue, please help!!!
ingjaime
3 Posts
0
September 28th, 2017 12:00
I buy this Manufacturer Part SNPN2M64C/8G Dell Part A7022339 from your webpage and I have the same exact issue
ingjaime
3 Posts
1
September 28th, 2017 12:00
I had the same exact issue with a dell e6440 memory module that I'm trying to install Manufacturer Part SNPN2M64C/8G Dell Part A7022339