Unsolved
This post is more than 5 years old
7 Posts
0
1350
July 24th, 2008 11:00
How to setup multi-hop configuration
Locally I have 2 frames, a DMX-3000 and a DMX3, and another DMX3 remotely.
I want to replicate data from the local DMX-3000 to the local DMX3 using Synchronous SRDF. Then I want to replicate that data to the remote DMX3 via SRDF/A due to the distance.
For the 1st hop, I can use symrdf createpair to make my R1/R2 pairs from the local DMX-3000 to the local DMX3.
Then for the 2nd hop I would setup R1/BCV devices on the local DMX3 to replicate the data to the remote DMX3.
My question is, how do I setup the relationship between the local R1/BCV device and the remote R2 device?
I want to replicate data from the local DMX-3000 to the local DMX3 using Synchronous SRDF. Then I want to replicate that data to the remote DMX3 via SRDF/A due to the distance.
For the 1st hop, I can use symrdf createpair to make my R1/R2 pairs from the local DMX-3000 to the local DMX3.
Then for the 2nd hop I would setup R1/BCV devices on the local DMX3 to replicate the data to the remote DMX3.
My question is, how do I setup the relationship between the local R1/BCV device and the remote R2 device?
No Events found!



xe2sdc
4 Operator
•
2.8K Posts
0
July 25th, 2008 06:00
...
While being foolproof and incapable of error we also introduce small errors just to induce human people believe we are also human. It's a nice trick that you discovered. We have to find better/different errors, hopefully less prone to detection by humans.
Davidy8s
154 Posts
0
July 25th, 2008 06:00
"I'm sorry Dave... I'm afraid I can't do that"... - HAL... (and my wife)
When I asked around, Bergamoans? Bergamites? well - the nice people in Bergamo - would only speak about Stefano in hushed tones.
dynamox
9 Legend
•
20.4K Posts
0
July 25th, 2008 07:00
RRR
4 Operator
•
5.7K Posts
0
July 25th, 2008 07:00
RRR
4 Operator
•
5.7K Posts
0
July 25th, 2008 07:00
xe2sdc
4 Operator
•
2.8K Posts
0
July 25th, 2008 07:00
However the dialect is quite nice .. there is a great
tongue-twister that sounds like
"A cala aca la ca la a a cala ca la" .. That obviously translates to "Guarda quella vacca che va a quella casa" or if you prefer english "Look at that cow, going at that house" ...
Davidy8s
154 Posts
0
July 25th, 2008 08:00
Not that there is anything wrong with either drink... or either sex drinking either coffee beverage...
Now, back to our way off topic, and rather humorous discussion
Dave Yates
EMC TSE3
Benevolent Host S/W & Mainframe Forum Moderator
xe2sdc
4 Operator
•
2.8K Posts
0
July 25th, 2008 13:00
xe2sdc
4 Operator
•
2.8K Posts
0
July 25th, 2008 13:00
xe2sdc
4 Operator
•
2.8K Posts
0
July 25th, 2008 13:00
SKT2
2 Intern
•
1.3K Posts
0
July 26th, 2008 14:00
exactly that is what we are going to have in a few months; We have already upgraded the SE as a pre-work.
xe2sdc
4 Operator
•
2.8K Posts
0
July 28th, 2008 04:00