Many thanks for your advice and could you please run through the process for checking the correct operation of the rescue disk . Does the disk need to be loaded prior to 'power on F2' or once the bios page is open and once in the Bios what is the process from then on.
You need to put the bootable DVD in the drive, close the drawer, and power PC completely off.
Then power PC on and tap F12 to open the boot menu. Look for the option to boot from the optical drive on that menu. You don't want to change any boot options in BIOS setup.
JOcean
9 Legend
•
12.6K Posts
1
November 3rd, 2021 15:00
As soon as you boot the system start tapping F2. The BIOS screen will display shortly after that and when it does you can stop tapping.
Aman_Bhatnagar
9 Posts
0
November 5th, 2021 06:00
As you turn on your computer
Aman_Bhatnagar
9 Posts
0
November 5th, 2021 06:00
As soon the computer turns on immediately start tapping those keys .
RoHe
10 Elder
•
45.2K Posts
0
November 5th, 2021 12:00
@stevesalp Make sure you test that the DVD boots the PC before you need it.
stevesalp
6 Posts
0
November 6th, 2021 02:00
Many thanks for the advice,
Regards
stevesalp
6 Posts
0
November 6th, 2021 03:00
Many thanks for your advice and could you please run through the process for checking the correct operation of the rescue disk . Does the disk need to be loaded prior to 'power on F2' or once the bios page is open and once in the Bios what is the process from then on.
Regards
RoHe
10 Elder
•
45.2K Posts
1
November 6th, 2021 15:00
You need to put the bootable DVD in the drive, close the drawer, and power PC completely off.
Then power PC on and tap F12 to open the boot menu. Look for the option to boot from the optical drive on that menu. You don't want to change any boot options in BIOS setup.
stevesalp
6 Posts
0
November 7th, 2021 08:00
Very many thanks for all your assistance