Start a Conversation

Solved!

Go to Solution

24400

October 29th, 2018 01:00

Inspiron 15-3543, RAM upgrade, power consumption

Hey. I'm planning to upgrade my RAM in Inspiron 3543 (i5) model. Can I just go with any DDR3L modules?

Is there anything else I have to take care of choosing the DDR3L RAM like the power compatibility with the laptop itself?

 

Thanks :)

Community Manager

 • 

54.3K Posts

October 29th, 2018 10:00


The 2014 Inspiron 15-3542/3543 have only one memory slot that supports up to 8GB, DDR3L, 1600MHz, Unbuffered, Non-ECC sodimm memory.

Inspiron 15-3543 validated 8GB memory stick Dell part number = 3FX6M

7 Technologist

 • 

12.1K Posts

October 29th, 2018 02:00

Well not just any. The following site is Crucial where you can match the memory to your system. The memory specs are DDR3L 1600. And you have 1 memory slot which will take a maximum of 8GB. So 1 8GB memory module.

http://www.crucial.com/usa/en/compatible-upgrade-for/Dell/inspiron-15-%283543%29

3 Posts

October 29th, 2018 03:00

So only DDR3L 1600 MHz models compatible? But the site you referred also show 1866 MHz models to be compatible. I'm confused.

7 Technologist

 • 

12.1K Posts

October 29th, 2018 04:00

Dell specs are up to 1600 Mhz. Even if you could use 1866 you would probably not see a difference between the two. In that instance the system would run 1866 at 1600.  Not confusing, Dell specifies 1600 so go with the memory specified for your system.

3 Posts

October 30th, 2018 00:00

Thanks for the info :)

12 Posts

May 8th, 2019 09:00

Crucial now has 16Gb 1600 single-slot SODIMM available. Will this work with this motherboard?

3 Posts

July 10th, 2019 01:00

Most Likely YES

if you have i7 5500u .. it says it supports 16 GB

but the dell has not Verified it yet! 

borrow a ram from someone and check if it is working!  :Smile:

April 30th, 2020 10:00

sir I m using Inspiron 3543 laptop I upgraded to SSD due to completely death of old hard disk I went to SSD now little bit ok but now I am using mechanical engineering software like CATIA hypermesh so. I need to update my ram also to 8gb .I m confused with single channel and dual channel if I buy dual channel 8 gb single what I'll happen can you elaborate it please

10 Elder

 • 

23.2K Posts

April 30th, 2020 11:00

Dual channel requires two matched modules - which you can't have in this system.

Running CATIA software on a low-end budget system like this -- if it's even possible -- will require a vast amount of patience on your part.

 

July 20th, 2020 03:00

Dell Inspiron 15 3543 W10 Pro 64bit i7 5500U 16GB Single-Channel Dell Inc. 064DYJ Intel graphics 5500 2047MB NVIDIA GeForce 840M WDS500G2B0A-00SM50 She's still a BEAST no matter how long it pass...

1 Message

February 10th, 2022 06:00

Hi,

 

I am using Inspiron 3543 had default 4gb before upgraded to 8gb DDR3 which i am using from 3 years pic of the ram i am using plus the laptop slot pic is attached and its available on flipkart at around Rs 2000+.5ded3e42-de29-4919-b0c9-8c21d82807e8.jpgf886bd33-166d-4123-b1c1-a3e381d583f0.jpg

No Events found!

Top