Moderator

 • 

17.9K Posts

March 9th, 2018 05:00

LPT_1,

Below is the beep code table for the 3521. You will need to replace the motherboard.

Beep Codes

The computer might emit a series of beeps during start-up if the LCD cannot display errors or problems. The following repetitive beep codes help the user troubleshoot problems with this computer.

Beep Code Overview
Beeps Description Possible Cause
1 BIOS ROM checksum in progress or failure System board failure, covers BIOS corruption or ROM errors.
2 No Memory (RAM) detected Memory or Memory slot failure
3
  • chipset Error (North and South bridge error, DMA/IMR/Timer error)
  • Time-Of-Day Clock test failure
  • Gate A20 failure
  • Super I/O chip failure
  • Keyboard controller test failure
System board failure
4 Memory read / write failure Memory failure
5 Real Time Clock (RTC) power fail CMOS battery failure
6 Video BIOS test failure Video subsystem failure
7 CPU Cache test failure Processor failure
8 LCD LCD failure

1 Message

October 11th, 2018 04:00

I had the same issue, it first appeared after a change from HDD to SSD; in the end I downloaded the actual BIOS - it was'n a newer version but I thought, maybe the BIOS itself has an issue; after flashing the BIOS the beep code 1 did not appear again (I did that this morning with several starts since).

So I hope this ends my problem and can help you solving your issue.

September 10th, 2019 08:00

there is problem with your ram and cmos battery you need to replace them

4 Posts

January 23rd, 2021 16:00

Did you ever solve the issue? I have the same problem and not it wont boot at all and cant flash the bios or do recovery

No Events found!

Top