After you had created the bootable windows 10 drive, please follow the steps below:
1. Power on system, wait a few minutes and then insert the bootable windows 10 flash drive into a USB port.
2. Power off system.
3. Power on the system, quickly start tapping F12 key continuously until you see Preparing one time boot menu. At the boot menu, select the bootable flash drive under UEFI BOOT.
4. Identify and select your language, time and currency format.
LSUFAN51
4 Operator
•
6.5K Posts
1
February 20th, 2017 05:00
If resetting windows 10 option still doesn't work....
I'd suggest you create a bootable windows 10 flash drive and then reinstall windows from the drive. Please flow steps in the link below:
How to Create A Bootable Windows 10 USB Drive - YouTube
LSUFAN51
4 Operator
•
6.5K Posts
1
February 20th, 2017 05:00
If Disk cleanup doesn't work I suggest run the System File Checker and Try to reset windows 10 again. Please follow steps below:
a) Press Windows key + X key at the same time, select Command prompt (Admin)
b) In the command prompt type the following command: sfc/scannow and press enter
If no corrupted system files were found , then I would suggest you try the following steps:
a) Select Command prompt (Admin)
b) In command prompt, type the following commands and press Enter after each command....
DISM.exe /Online /Cleanup-image /Scanhealth
DISM.exe /Online /Cleanup-image /Restorehealth
LSUFAN51
4 Operator
•
6.5K Posts
1
February 20th, 2017 05:00
:emotion-2:
I'd suggest you do a disk cleanup and then try to reset windows 10 again. Please follow steps in link below:
https://youtu.be/oI_-Cr8CIH0
LSUFAN51
4 Operator
•
6.5K Posts
0
February 20th, 2017 06:00
Now click on 'Install Now' button. This option will reinstall windows 10.
LSUFAN51
4 Operator
•
6.5K Posts
1
February 20th, 2017 06:00
Lastly, you can use Microsoft tool to do a 'Clean' install of windows 10. Please click on link below:
Start fresh with a clean installation of Windows 10
LSUFAN51
4 Operator
•
6.5K Posts
1
February 20th, 2017 06:00
After you had created the bootable windows 10 drive, please follow the steps below:
1. Power on system, wait a few minutes and then insert the bootable windows 10 flash drive into a USB port.
2. Power off system.
3. Power on the system, quickly start tapping F12 key continuously until you see Preparing one time boot menu. At the boot menu, select the bootable flash drive under UEFI BOOT.
4. Identify and select your language, time and currency format.