Unsolved
This post is more than 5 years old
6 Posts
0
19929
November 25th, 2012 16:00
Missing Base System Device Driver
Hi just reloaded WIN 7 on my XPS 1645. The device manger shows 2 missing base system devices with the following error message.
The drivers for this device are not installed. (Code 28)
For:
1. PCI bus 9, device 0, function 1
2. PCI bus 9, device 0, function 2
Seen some responses on other simular post with links for downloads. However the links indicate the details not available.
Can anyone point me right the direction?
Thanks
Dave
0 events found
No Events found!
Philip_Yip
11 Legend
•
16.1K Posts
•
65.9K Points
0
November 25th, 2012 16:00
You need to install the Chipset Drivers probably one of the mssing devices is the card reader.
The drivers are here: http://ftp.dell.com/Browse_For_Drivers/Laptops/Studio%20XPS/Studio%20XPS%201645/
See my wiki A Clean Install of Windows for full details. In particular Step 5b and 5c for driver instalaltion.
Start with Dell System Software http://ftp.dell.com/utility/DELL_SYSTEM-SOFTWARE_A01_R260746.exe
Intel Chipset http://ftp.dell.com/chipset/R228043.exe
Ricoh Card Reader http://ftp.dell.com/chipset/R234107.exe
You will need to install the rest after that. Also install Service Pack 1 if its not on your instalaltion DVD before any of the drivers.
jdrozlee
6 Posts
0
November 25th, 2012 17:00
Thanks! Should of searched on a WIN 7 reload.