Blue Screen Registry Error message PLEASE HELP

Question

Hi there. I'm having problems with my Studio 1535. I'm using Vista and have the latest Bios. When my laptop boots up I get the dreaded blue screen of death.

The error message says:

"A problem has been detected and windows has been shut down to prevent damage to your computer.

Then "REGISTRY ERROR" and the code: STOP 0x00000051, (0x00000001, 0x88A24008, 0x11DF000,0x00000368).

After running a diagnostic test it turns out my fan speed is in incorrect with the error code 3700. Also something is wrong with my AC adapter, but that should be fine because my battery works normally.

How do I solve the fan issue and will this fix the Blue Screen error?

Thank you.

speedstep · Answer

With a corrupt registry hive, you may receive the following Stop error message:

Stop 0x00000051 REGISTRY ERROR

Additionally, when you try to log on to the computer, you may receive an error message that is similar to the following error message:

STOP 0x0000001E(0xc0000005,0x8051aebb,0x00000000,0x6f007e0f) KMODE EXCEPTION NOT HANDLED NTOSKRNL.EXE 80518ebb80400000 384d5876-ntoskrnl.exe

This problem may occur if a registry key in the Last Known Good control set is damaged. The system fails when it tries to clean up the Last Known Good control set to prepare to copy the current control set. This process makes the current control set the Last Known Good control set.

Your drive is likely physically damaged and the OS will need to be re installed from scratch on a new working hard drive.

Logan31 · Answer

Ok thanks for the help. I think I might just buy a new PC

Locked Topics – Laptops General

Blue Screen Registry Error message PLEASE HELP

Was this post helpful?