9 Legend

 • 

87.5K Posts

May 2nd, 2012 16:00

4 Posts

October 30th, 2012 06:00

This may be a bit out of date for you, but I am now finalizing my screen replacement.  I too have a 1545.  The matter of screen replacement is not difficult, however, you need to be careful when it comes to "Tearing" into the job.  In order

to determine what screen you have, literally, you will want to visually inspect the part number on the back.  Take the

time to go to Youtube and watch a couple of 5 minute videos, you will see how simple the task is.  I have the LP156WH1-TLC1 screen in my model PP41L, model number on bottom of laptop.  This is a CCFL, short for the type

of backlighting used to provide light for the "LED" pixels.  There are two industry backlighting types, CCFL and LED.

The older technology CCFL stands for "Cold Cathode Flourescent Light" and the LED stands for "Light Emitting Diode".

There are plenty of screens for both types for sale, the CCFL screens are a bit more expensive because they are not being produced.  The technical community favors the LED flavor, more efficient use of power and supposedly give a

light product.

    Now are you thoroughly confused?  Don't be.  Dell makes a retrofit kit that consists of a cable and screen that will ship to you for $150.  This is the LED replacement screen and cable for the 1545 model.  I do not have the kit # in front of me now, I did place it in another post.  You can call Dell and they can give you the part number, if they want to.  I was

not impressed with the guy I had in technical support, I think I made him do some work he didn't want to do.  I was a no sale also.  I went to Ebay and had the cable shipped to my house for $7.00 and bought a new screen shipped to the house for $55.  My screen is not what I ordered, but I think it will work.  I say this because I have researched the screen with a website that lets you compare the specifications for some 28,000 screens.  Believe me, there are a lot of people making these screens.  Go to "Panelook.com" and play around with the search tools there and you will get overwhelmed with information.  Might take you a while to figure out what you want, but you can type in the screen number you have and you will see the specs on your entry.  I think I am right in telling you that the biggest thing you will need to verify is that you will have a 30 pin connector on the CCFL screen and a 40 pin connector on the LED screen.

That is the primary difference in the two systems, also note that the LED screen will not have the small red and white

wires that the CCFL screens have.  The LED screen will not use the small power inverter board located at the bottom of the screen either, the board is where the two small wires plug in.

   Keeping it simple, if you want to keep like parts, you will want to buy a CCFL screen.  You will find that the LG Phillips

folks along with a dozen or more others offer replacement screens.  You can go to Ebay and find literally hundreds of people willing to sell you a screen.  If you have the money, your local computer repair shop will remove and replace your screen for $200.  I am an old electronic mechanic who likes to tinker, so I justify my actions and see me putting $130

in my pocket by doing the work myself.  There is a lot of information out there, but you know, it is not organized in a way where we "Lay Persons" can get at it and know we are doing it right.  Sorry for this long rant, but I like to write early

in the morning, don't know when to stop.  Good luck with your decision and do check the website I told you about.  Success in this effort means comparing specifications and buying the screen that matches yours, pay special attention to the interface and lighting specs as you troll through the screen listings.

No Events found!

Top