OK.....Replaced my processor w/Pentium M 2.0Ghz/2MB/533FSB on 2-6. Now when I went into cmos to check the stats on everything, memory is still being shown as 400Mhz FSB. Is there a way or can the FSB be changed to co-inside with the 533Mhz FSB on memory and the new processor, or could the cmos battery be unpluged and the pluged back in to make this change? or is this all connected to the chipset on the M/B? Any answers or help would be greatly appreciated.....thanks a bunch.
husky0894
1.6K Posts
0
February 1st, 2009 18:00
If it shipped with a Celeron, it likely has a 910 chipset. Fastest: 2.1/400 Pentium M 765
If it shipped with a Pentium M on a 533 bus it has the 915. Fastest: 2.26/533 Pentium M 780.
andrew5859
28 Posts
0
February 1st, 2009 19:00
will a celeron 2.0ghz cpu work in it
husky0894
1.6K Posts
0
February 2nd, 2009 03:00
As long as it's a Pentium M based Celereon, yes. Core-based CPUs don't work.
andrew5859
28 Posts
0
February 11th, 2009 12:00
OK.....Replaced my processor w/Pentium M 2.0Ghz/2MB/533FSB on 2-6. Now when I went into cmos to check the stats on everything, memory is still being shown as 400Mhz FSB. Is there a way or can the FSB be changed to co-inside with the 533Mhz FSB on memory and the new processor, or could the cmos battery be unpluged and the pluged back in to make this change? or is this all connected to the chipset on the M/B? Any answers or help would be greatly appreciated.....thanks a bunch.
Andrew