Linux Developer Systems

[eslam.husseiny]

Hi everybody,

  I have a Dell XPS 13" L321X with service tag <ADMIN NOTE: Service tag removed per privacy policy>

and I have installed Ubuntu 12.04 LTS

And I also added Sputnik Kernel PPA and Sputnik Policykit PPA

but I still have a problem with wireless adapter, wireless adapter seems not present as Network Manager says "No network devices available"

I also checked the wireless adapter using the following commands

�

ngamal@ngamal:~$ sudo ifconfig  -a
lo        Link encap:Local Loopback  
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:65536  Metric:1
          RX packets:4044 errors:0 dropped:0 overruns:0 frame:0
          TX packets:4044 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:413999 (413.9 KB)  TX bytes:413999 (413.9 KB)

ngamal@ngamal:~$ sudo nm-tool

NetworkManager Tool

State: disconnected

�

ngamal@ngamal:~$ sudo lspci
00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09)
00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09)
00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04)
00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 05)
00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 05)
00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b5)
00:1c.1 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 2 (rev b5)
00:1c.3 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 (rev b5)
00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 05)
00:1f.0 ISA bridge: Intel Corporation QS67 Express Chipset Family LPC Controller (rev 05)
00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller (rev 05)
00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 05)
03:00.0 USB controller: Fresco Logic FL1009 USB 3.0 Host Controller (rev 02)

ngamal@ngamal:~$ sudo lshw -C network
ngamal@ngamal:~$

as the above commands commands shows that there is no wireless adapter

I'm also using linux-image-generic-lts-raring

ngamal@ngamal:~$ uname -r
3.8.0-29-generic

I also added the following line in /etc/modprobe.d/blacklist.conf

#fix dell wifi/bluetooth:
blacklist dell_laptop

�

any ideas how to fix this issue ?

�

Thanks in advance

�

[doubleo2]

Does your wireless work when you first start your computer? Lots of people, myself included, seem to have a problem where the connection drops after a while, it won't reconnect and then the wireless adapter becomes unavailable. Sounds like you might have the same problem.

[eslam.husseiny]

Yeah, it sometimes works after rebooting but actually as you said it lasts for a short while and then it became unavailable

[doubleo2]

As I said, I think it's a fairly common problem and sputnik support is... intermittent, like our wifi :-)

I really wanted sputnik to be great, but it is not. I spend more time working on workarounds than on work. I'm buying a macbook (as soon as my laptop stays connected long enough to checkout online)

[DELL-Jared D]

eslam.husseiny: Can you provide the output of "rfkill list"? The output of dmesg would also help. Also, which BIOS version are you running?

Please note that Ubuntu was never officially supported on the L321X, only the L322X (and only if you buy the Developer Edition, though we've tried to offer best-effort help for those who didn't buy their systems with Ubuntu). However, my L321X, which I've had for 1.5 years (bought as a personal system right when it came out) has had no problems like that with the wireless. The only problem I've had with wireless on my personal L321X was with a buggy access point using a draft of the 802.11ac standard.

[DELL-Jared D]

"As I said, I think it's a fairly common problem and sputnik support is... intermittent, like our wifi :-)"

doubleo2, did you buy the XPS 13 DE? If so, did you try reaching out to ProSupport over the phone? That is the official support channel for Sputnik. This forum is meant to facilitate discussion about Sputnik but is not meant as an official support channel.

[eslam.husseiny]

D. Jared Dominguez: here you are rfkill list output

0: phy0: Wireless LAN
Soft blocked: no
Hard blocked: no
1: hci0: Bluetooth
Soft blocked: no
Hard blocked: no

but this output will be as following if i got no devices message

0: hci0: Bluetooth
Soft blocked: no
Hard blocked: no

I also upgraded bios to version A08

# dmidecode 2.11
SMBIOS 2.7 present.

Handle 0x000C, DMI type 0, 24 bytes
BIOS Information
Vendor: Dell Inc.
Version: A08
Release Date: 01/22/2013
Address: 0xE0000
Runtime Size: 128 kB
ROM Size: 2560 kB
Characteristics:
PCI is supported
PNP is supported
BIOS is upgradeable
BIOS shadowing is allowed
ESCD support is available
Boot from CD is supported
Selectable boot is supported
BIOS ROM is socketed
EDD is supported
5.25"/360 kB floppy services are supported (int 13h)
5.25"/1.2 MB floppy services are supported (int 13h)
3.5"/720 kB floppy services are supported (int 13h)
Print screen service is supported (int 5h)
8042 keyboard services are supported (int 9h)
Serial services are supported (int 14h)
Printer services are supported (int 17h)
CGA/mono video services are supported (int 10h)
ACPI is supported
USB legacy is supported
LS-120 boot is supported
Smart battery is supported
BIOS boot specification is supported
Function key-initiated network boot is supported
Targeted content distribution is supported
BIOS Revision: 0.1

Handle 0x0032, DMI type 13, 22 bytes
BIOS Language Information
Language Description Format: Abbreviated
Installable Languages: 4
en-US
fr-FR
ja-JP
ko-KR
Currently Installed Language: en-US

and here you are dmesg output too

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.8.0-29-generic (buildd@panlong) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #42~precise1-Ubuntu SMP Wed Aug 14 16:19:23 UTC 2013 (Ubuntu 3.8.0-29.42~precise1-generic 3.8.13.5)
[    0.000000] Command line: BOOT_IMAGE=/vmlinuz-3.8.0-29-generic root=/dev/mapper/ubuntu-root ro quiet
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] Disabled fast string operations
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000b50fafff] usable
[    0.000000] BIOS-e820: [mem 0x00000000b50fb000-0x00000000daeeefff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000daeef000-0x00000000daf9efff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000daf9f000-0x00000000daffefff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000dafff000-0x00000000df9fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffd80000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000011fdfffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: Dell Inc.          Dell System XPS L321X/0Y4RM9, BIOS A08 01/22/2013
[    0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] No AGP bridge found
[    0.000000] e820: last_pfn = 0x11fe00 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0FFC00000 mask FFFC00000 write-protect
[    0.000000]   1 base 000000000 mask F80000000 write-back
[    0.000000]   2 base 080000000 mask FC0000000 write-back
[    0.000000]   3 base 0C0000000 mask FE0000000 write-back
[    0.000000]   4 base 0DB000000 mask FFF000000 uncachable
[    0.000000]   5 base 0DC000000 mask FFC000000 uncachable
[    0.000000]   6 base 100000000 mask FE0000000 write-back
[    0.000000]   7 base 11FE00000 mask FFFE00000 uncachable
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] e820: last_pfn = 0xb50fb max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000f0100-0x000f010f] mapped at [ffff8800000f0100]
[    0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff]
[    0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
[    0.000000] reserving inaccessible SNB gfx pages
[    0.000000] init_memory_mapping: [mem 0x00000000-0xb50fafff]
[    0.000000]  [mem 0x00000000-0xb4ffffff] page 2M
[    0.000000]  [mem 0xb5000000-0xb50fafff] page 4k
[    0.000000] kernel direct mapping tables up to 0xb50fafff @ [mem 0x1fffb000-0x1fffffff]
[    0.000000] init_memory_mapping: [mem 0x100000000-0x11fdfffff]
[    0.000000]  [mem 0x100000000-0x11fdfffff] page 2M
[    0.000000] kernel direct mapping tables up to 0x11fdfffff @ [mem 0xb50f9000-0xb50fafff]
[    0.000000] RAMDISK: [mem 0x3604c000-0x3701dfff]
[    0.000000] ACPI: RSDP 00000000000f0120 00024 (v02 DELL  )
[    0.000000] ACPI: XSDT 00000000daffe120 0009C (v01 DELL    QA09    00000002 LOHR 00000002)
[    0.000000] ACPI: FACP 00000000dafef000 000F4 (v03 DELL    QA09    00000002 LOHR 00000002)
[    0.000000] ACPI: DSDT 00000000daff2000 095A4 (v02 DELL    SNB-CPT 00000000 INTL 20061109)
[    0.000000] ACPI: FACS 00000000daf19000 00040
[    0.000000] ACPI: SLIC 00000000daffd000 00176 (v01 DELL    QA09    00000002 LOHR 00000001)
[    0.000000] ACPI: SSDT 00000000daffc000 00166 (v01 DELL   PtidDevc 00001000 INTL 20061109)
[    0.000000] ACPI: ASF! 00000000daff1000 000A5 (v32 DELL    QA09    00000002 LOHR 00000002)
[    0.000000] ACPI: HPET 00000000dafee000 00038 (v01 DELL    QA09    00000002 LOHR 00000002)
[    0.000000] ACPI: APIC 00000000dafed000 00098 (v01 DELL    QA09    00000002 LOHR 00000002)
[    0.000000] ACPI: MCFG 00000000dafec000 0003C (v01 DELL    QA09    00000002 LOHR 00000002)
[    0.000000] ACPI: SSDT 00000000dafeb000 00846 (v01  PmRef  Cpu0Ist 00003000 INTL 20061109)
[    0.000000] ACPI: SSDT 00000000dafea000 00996 (v01  PmRef    CpuPm 00003000 INTL 20061109)
[    0.000000] ACPI: UEFI 00000000dafe9000 0003E (v01 DELL    QA09    00000002 LOHR 00000002)
[    0.000000] ACPI: UEFI 00000000dafe8000 00042 (v01 PTL      COMBUF 00000001 PTL  00000001)
[    0.000000] ACPI: POAT 00000000dafe7000 00055 (v03 DELL    QA09    00000002 LOHR 00000002)
[    0.000000] ACPI: DMAR 00000000dafe6000 000E8 (v01 INTEL      SNB  00000001 INTL 00000001)
[    0.000000] ACPI: UEFI 00000000dafe5000 00292 (v01 DELL    QA09    00000002 LOHR 00000002)
[    0.000000] ACPI: SSDT 00000000dafe4000 002F2 (v01 DELL   AoacTabl 00001000 INTL 20061109)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000011fdfffff]
[    0.000000] Initmem setup node 0 [mem 0x00000000-0x11fdfffff]
[    0.000000]   NODE_DATA [mem 0x11fdfb000-0x11fdfffff]
[    0.000000]  [ffffea0000000000-ffffea00047fffff] PMD -> [ffff88011be00000-ffff88011f3fffff] on node 0
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00010000-0x00ffffff]
[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
[    0.000000]   Normal   [mem 0x100000000-0x11fdfffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00010000-0x0009dfff]
[    0.000000]   node   0: [mem 0x00100000-0xb50fafff]
[    0.000000]   node   0: [mem 0x100000000-0x11fdfffff]
[    0.000000] On node 0 totalpages: 872073
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 142 pages reserved
[    0.000000]   DMA zone: 3776 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 11524 pages used for memmap
[    0.000000]   DMA32 zone: 726007 pages, LIFO batch:31
[    0.000000]   Normal zone: 2040 pages used for memmap
[    0.000000]   Normal zone: 128520 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x0e] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 14, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[    0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[    0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[    0.000000] PM: Registered nosave memory: 00000000b50fb000 - 00000000daeef000
[    0.000000] PM: Registered nosave memory: 00000000daeef000 - 00000000daf9f000
[    0.000000] PM: Registered nosave memory: 00000000daf9f000 - 00000000dafff000
[    0.000000] PM: Registered nosave memory: 00000000dafff000 - 00000000dfa00000
[    0.000000] PM: Registered nosave memory: 00000000dfa00000 - 00000000f8000000
[    0.000000] PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000
[    0.000000] PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000
[    0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
[    0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed08000
[    0.000000] PM: Registered nosave memory: 00000000fed08000 - 00000000fed09000
[    0.000000] PM: Registered nosave memory: 00000000fed09000 - 00000000fed10000
[    0.000000] PM: Registered nosave memory: 00000000fed10000 - 00000000fed1a000
[    0.000000] PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000
[    0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
[    0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
[    0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[    0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffd80000
[    0.000000] PM: Registered nosave memory: 00000000ffd80000 - 0000000100000000
[    0.000000] e820: [mem 0xdfa00000-0xf7ffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] PERCPU: Embedded 28 pages/cpu @ffff88011fa00000 s85056 r8192 d21440 u262144
[    0.000000] pcpu-alloc: s85056 r8192 d21440 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 858303
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.8.0-29-generic root=/dev/mapper/ubuntu-root ro quiet
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] __ex_table already sorted, skipping sort
[    0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 3333432k/4716544k available (7170k kernel code, 1228252k absent, 154860k reserved, 6073k data, 1012k init)
[    0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000]     RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000]     RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
[    0.000000] NR_IRQS:16640 nr_irqs:744 16
[    0.000000] Extended CMOS year: 2000
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] allocated 14155776 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.004000] tsc: Detected 1696.218 MHz processor
[    0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 3392.43 BogoMIPS (lpj=6784872)
[    0.000004] pid_max: default: 32768 minimum: 301
[    0.000024] Security Framework initialized
[    0.000035] AppArmor: AppArmor initialized
[    0.000036] Yama: becoming mindful.
[    0.000303] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.001110] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.001440] Mount-cache hash table entries: 256
[    0.001590] Initializing cgroup subsys cpuacct
[    0.001591] Initializing cgroup subsys memory
[    0.001597] Initializing cgroup subsys devices
[    0.001598] Initializing cgroup subsys freezer
[    0.001599] Initializing cgroup subsys blkio
[    0.001600] Initializing cgroup subsys perf_event
[    0.001603] Initializing cgroup subsys hugetlb
[    0.001623] Disabled fast string operations
[    0.001625] CPU: Physical Processor ID: 0
[    0.001626] CPU: Processor Core ID: 0
[    0.001630] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.001630] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.001632] mce: CPU supports 7 MCE banks
[    0.001641] CPU0: Thermal monitoring handled by SMI
[    0.001647] process: using mwait in idle threads
[    0.001650] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
[    0.001650] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
[    0.001650] tlb_flushall_shift: 5
[    0.001753] Freeing SMP alternatives: 24k freed
[    0.003569] ACPI: Core revision 20121018
[    0.008561] ftrace: allocating 29358 entries in 115 pages
[    0.021340] dmar: Host address width 36
[    0.021343] dmar: DRHD base: 0x000000fed90000 flags: 0x0
[    0.021349] dmar: IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a
[    0.021350] dmar: DRHD base: 0x000000fed91000 flags: 0x1
[    0.021354] dmar: IOMMU 1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a
[    0.021355] dmar: RMRR base: 0x000000daa33000 end: 0x000000daa49fff
[    0.021356] dmar: RMRR base: 0x000000db800000 end: 0x000000df9fffff
[    0.021425] IOAPIC id 14 under DRHD base  0xfed91000 IOMMU 1
[    0.021426] HPET id 0 under DRHD base 0xfed91000
[    0.021427] HPET id 0 under DRHD base 0xfed91000
[    0.021428] HPET id 0 under DRHD base 0xfed91000
[    0.021429] HPET id 0 under DRHD base 0xfed91000
[    0.021430] HPET id 0 under DRHD base 0xfed91000
[    0.021430] HPET id 0 under DRHD base 0xfed91000
[    0.021431] HPET id 0 under DRHD base 0xfed91000
[    0.021432] HPET id 0 under DRHD base 0xfed91000
[    0.021652] Enabled IRQ remapping in x2apic mode
[    0.021654] Enabling x2apic
[    0.021654] Enabled x2apic
[    0.021660] Switched APIC routing to cluster x2apic.
[    0.022107] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.061745] smpboot: CPU0: Intel(R) Core(TM) i7-2637M CPU @ 1.70GHz (fam: 06, model: 2a, stepping: 07)
[    0.061753] TSC deadline timer enabled
[    0.061757] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, Intel PMU driver.
[    0.061762] perf_event_intel: PEBS disabled due to CPU errata, please upgrade microcode
[    0.061764] ... version:                3
[    0.061765] ... bit width:              48
[    0.061766] ... generic registers:      4
[    0.061766] ... value mask:             0000ffffffffffff
[    0.061767] ... max period:             000000007fffffff
[    0.061768] ... fixed-purpose events:   3
[    0.061769] ... event mask:             000000070000000f
[    0.073748] Disabled fast string operations
[    0.073762] CPU1: Thermal monitoring handled by SMI
[    0.075938] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.086940] Disabled fast string operations
[    0.086953] CPU2: Thermal monitoring handled by SMI
[    0.100040] Disabled fast string operations
[    0.100053] CPU3: Thermal monitoring handled by SMI
[    0.062814] smpboot: Booting Node   0, Processors  #1 #2 #3
[    0.102147] Brought up 4 CPUs
[    0.102151] smpboot: Total of 4 processors activated (13569.74 BogoMIPS)
[    0.106088] devtmpfs: initialized
[    0.106780] EVM: security.selinux
[    0.106782] EVM: security.SMACK64
[    0.106783] EVM: security.capability
[    0.106818] PM: Registering ACPI NVS region [mem 0xdaeef000-0xdaf9efff] (720896 bytes)
[    0.107411] regulator-dummy: no parameters
[    0.107449] NET: Registered protocol family 16
[    0.107559] ACPI: bus type pci registered
[    0.107609] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.107611] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.112120] PCI: Using configuration type 1 for base access
[    0.112806] bio: create slab <bio-0> at 0
[    0.112875] ACPI: Added _OSI(Module Device)
[    0.112876] ACPI: Added _OSI(Processor Device)
[    0.112878] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.112879] ACPI: Added _OSI(Processor Aggregator Device)
[    0.114110] ACPI: EC: Look up EC in DSDT
[    0.115344] ACPI: Executed 2 blocks of module-level executable AML code
[    0.117318] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.117677] ACPI: SSDT 00000000daee0798 00727 (v01  PmRef  Cpu0Cst 00003001 INTL 20061109)
[    0.118000] ACPI: Dynamic OEM Table Load:
[    0.118002] ACPI: SSDT           (null) 00727 (v01  PmRef  Cpu0Cst 00003001 INTL 20061109)
[    0.130122] ACPI: SSDT 00000000daee1a98 00303 (v01  PmRef    ApIst 00003000 INTL 20061109)
[    0.130461] ACPI: Dynamic OEM Table Load:
[    0.130462] ACPI: SSDT           (null) 00303 (v01  PmRef    ApIst 00003000 INTL 20061109)
[    0.130568] ACPI: SSDT 00000000daedfd98 00119 (v01  PmRef    ApCst 00003000 INTL 20061109)
[    0.130880] ACPI: Dynamic OEM Table Load:
[    0.130882] ACPI: SSDT           (null) 00119 (v01  PmRef    ApCst 00003000 INTL 20061109)
[    0.134187] ACPI: Interpreter enabled
[    0.134191] ACPI: (supports S0 S3 S4 S5)
[    0.134207] ACPI: Using IOAPIC for interrupt routing
[    0.137626] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[    0.137715] ACPI: No dock devices found.
[    0.137719] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.137959] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[    0.137961] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.138036] \_SB_.PCI0:_OSC invalid UUID
[    0.138037] _OSC request data:1 8 0
[    0.138495] PCI host bridge to bus 0000:00
[    0.138497] pci_bus 0000:00: root bus resource [bus 00-3e]
[    0.138499] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    0.138501] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
[    0.138505] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    0.138507] pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfeafffff]
[    0.138508] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff]
[    0.138516] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
[    0.138551] pci 0000:00:02.0: [8086:0116] type 00 class 0x030000
[    0.138561] pci 0000:00:02.0: reg 10: [mem 0xf0000000-0xf03fffff 64bit]
[    0.138567] pci 0000:00:02.0: reg 18: [mem 0xe0000000-0xefffffff 64bit pref]
[    0.138571] pci 0000:00:02.0: reg 20: [io  0x2000-0x203f]
[    0.138624] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
[    0.138648] pci 0000:00:16.0: reg 10: [mem 0xf0605000-0xf060500f 64bit]
[    0.138726] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.138761] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
[    0.138782] pci 0000:00:1a.0: reg 10: [mem 0xf060a000-0xf060a3ff]
[    0.138872] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.138898] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
[    0.138914] pci 0000:00:1b.0: reg 10: [mem 0xf0600000-0xf0603fff 64bit]
[    0.138983] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.139011] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
[    0.139141] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.139178] pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400
[    0.139309] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.139349] pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400
[    0.139480] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.139522] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
[    0.139544] pci 0000:00:1d.0: reg 10: [mem 0xf0609000-0xf06093ff]
[    0.139634] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.139660] pci 0000:00:1f.0: [8086:1c4d] type 00 class 0x060100
[    0.139785] pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601
[    0.139803] pci 0000:00:1f.2: reg 10: [io  0x2088-0x208f]
[    0.139811] pci 0000:00:1f.2: reg 14: [io  0x2094-0x2097]
[    0.139819] pci 0000:00:1f.2: reg 18: [io  0x2080-0x2087]
[    0.139827] pci 0000:00:1f.2: reg 1c: [io  0x2090-0x2093]
[    0.139835] pci 0000:00:1f.2: reg 20: [io  0x2060-0x207f]
[    0.139843] pci 0000:00:1f.2: reg 24: [mem 0xf0608000-0xf06087ff]
[    0.139889] pci 0000:00:1f.2: PME# supported from D3hot
[    0.139908] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
[    0.139923] pci 0000:00:1f.3: reg 10: [mem 0xf0604000-0xf06040ff 64bit]
[    0.139944] pci 0000:00:1f.3: reg 20: [io  0xefa0-0xefbf]
[    0.140043] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.140271] pci 0000:02:00.0: [8086:0091] type 00 class 0x028000
[    0.140417] pci 0000:02:00.0: reg 10: [mem 0xf0500000-0xf0501fff 64bit]
[    0.141127] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[    0.146282] pci 0000:00:1c.1: PCI bridge to [bus 02]
[    0.146292] pci 0000:00:1c.1:   bridge window [mem 0xf0500000-0xf05fffff]
[    0.146505] pci 0000:03:00.0: [1b73:1009] type 00 class 0x0c0330
[    0.146574] pci 0000:03:00.0: reg 10: [mem 0xf0400000-0xf040ffff 64bit]
[    0.146628] pci 0000:03:00.0: reg 18: [mem 0xf0410000-0xf0410fff 64bit]
[    0.146683] pci 0000:03:00.0: reg 20: [mem 0xf0411000-0xf0411fff 64bit]
[    0.146917] pci 0000:03:00.0: supports D1
[    0.146919] pci 0000:03:00.0: PME# supported from D0 D1 D3hot D3cold
[    0.154249] pci 0000:00:1c.3: PCI bridge to [bus 03]
[    0.154256] pci 0000:00:1c.3:   bridge window [mem 0xf0400000-0xf04fffff]
[    0.154294] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[    0.154321] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[    0.154346] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
[    0.154406] \_SB_.PCI0:_OSC invalid UUID
[    0.154407] _OSC request data:1 1f 0
[    0.154410]  pci0000:00: ACPI _OSC support notification failed, disabling PCIe ASPM
[    0.154411]  pci0000:00: Unable to request _OSC control (_OSC support mask: 0x08)
[    0.154802] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[    0.154842] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 11 12 14 15) *9
[    0.154880] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 11 12 14 15) *9
[    0.154917] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[    0.154953] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[    0.154989] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.155026] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[    0.155063] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[    0.155143] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.155146] vgaarb: loaded
[    0.155147] vgaarb: bridge control possible 0000:00:02.0
[    0.155272] SCSI subsystem initialized
[    0.155274] ACPI: bus type scsi registered
[    0.155307] libata version 3.00 loaded.
[    0.155322] ACPI: bus type usb registered
[    0.155334] usbcore: registered new interface driver usbfs
[    0.155341] usbcore: registered new interface driver hub
[    0.155358] usbcore: registered new device driver usb
[    0.155422] PCI: Using ACPI for IRQ routing
[    0.156933] PCI: pci_cache_line_size set to 64 bytes
[    0.157110] e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
[    0.157112] e820: reserve RAM buffer [mem 0xb50fb000-0xb7ffffff]
[    0.157113] e820: reserve RAM buffer [mem 0x11fe00000-0x11fffffff]
[    0.157179] NetLabel: Initializing
[    0.157181] NetLabel:  domain hash size = 128
[    0.157182] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.157189] NetLabel:  unlabeled traffic allowed by default
[    0.157234] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.157238] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.159249] Switching to clocksource hpet
[    0.163249] AppArmor: AppArmor Filesystem Enabled
[    0.163282] pnp: PnP ACPI init
[    0.163293] ACPI: bus type pnp registered
[    0.163325] pnp 00:00: [dma 4]
[    0.163341] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.163431] pnp 00:01: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.163459] pnp 00:02: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.163493] system 00:03: [io  0x0680-0x069f] has been reserved
[    0.163495] system 00:03: [io  0x1000-0x1003] has been reserved
[    0.163497] system 00:03: [io  0x1004-0x1013] has been reserved
[    0.163498] system 00:03: [io  0xffff] has been reserved
[    0.163500] system 00:03: [io  0x0400-0x0453] has been reserved
[    0.163501] system 00:03: [io  0x0458-0x047f] has been reserved
[    0.163503] system 00:03: [io  0x0500-0x057f] has been reserved
[    0.163504] system 00:03: [io  0x164e-0x164f] has been reserved
[    0.163507] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.163527] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.163563] system 00:05: [io  0x0454-0x0457] has been reserved
[    0.163566] system 00:05: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.163622] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.163659] pnp 00:07: Plug and Play ACPI device, IDs DLL052e PNP0f13 (active)
[    0.163798] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.163800] system 00:08: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.163801] system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.163803] system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.163805] system 00:08: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.163806] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.163808] system 00:08: [mem 0xfed90000-0xfed93fff] could not be reserved
[    0.163809] system 00:08: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.163811] system 00:08: [mem 0xff000000-0xffffffff] could not be reserved
[    0.163813] system 00:08: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.163815] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.163980] system 00:09: [mem 0x20000000-0x201fffff] could not be reserved
[    0.163981] system 00:09: [mem 0x40000000-0x401fffff] could not be reserved
[    0.163983] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.163994] pnp: PnP ACPI: found 10 devices
[    0.163995] ACPI: ACPI bus type pnp unregistered
[    0.170134] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.170153] pci 0000:00:1c.1: PCI bridge to [bus 02]
[    0.170159] pci 0000:00:1c.1:   bridge window [mem 0xf0500000-0xf05fffff]
[    0.170171] pci 0000:00:1c.3: PCI bridge to [bus 03]
[    0.170177] pci 0000:00:1c.3:   bridge window [mem 0xf0400000-0xf04fffff]
[    0.170221] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.170223] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.170224] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.170226] pci_bus 0000:00: resource 7 [mem 0xdfa00000-0xfeafffff]
[    0.170227] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff]
[    0.170229] pci_bus 0000:02: resource 1 [mem 0xf0500000-0xf05fffff]
[    0.170230] pci_bus 0000:03: resource 1 [mem 0xf0400000-0xf04fffff]
[    0.170257] NET: Registered protocol family 2
[    0.170385] TCP established hash table entries: 32768 (order: 7, 524288 bytes)
[    0.170482] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    0.170546] TCP: Hash tables configured (established 32768 bind 32768)
[    0.170568] TCP: reno registered
[    0.170575] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.170592] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.170641] NET: Registered protocol family 1
[    0.170650] pci 0000:00:02.0: Boot video device
[    0.170937] PCI: CLS 64 bytes, default 64
[    0.170968] Trying to unpack rootfs image as initramfs...
[    0.416984] Freeing initrd memory: 16200k freed
[    0.419396] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.419401] software IO TLB [mem 0xb10f9000-0xb50f9000] (64MB) mapped at [ffff8800b10f9000-ffff8800b50f8fff]
[    0.419753] Initialise module verification
[    0.419785] audit: initializing netlink socket (disabled)
[    0.419798] type=2000 audit(1378361630.420:1): initialized
[    0.446235] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.447350] VFS: Disk quotas dquot_6.5.2
[    0.447381] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.447732] fuse init (API version 7.20)
[    0.447786] msgmni has been set to 6542
[    0.448124] Key type asymmetric registered
[    0.448127] Asymmetric key parser 'x509' registered
[    0.448152] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.448177] io scheduler noop registered
[    0.448179] io scheduler deadline registered (default)
[    0.448184] io scheduler cfq registered
[    0.448433] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.448443] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.448473] intel_idle: MWAIT substates: 0x21120
[    0.448474] intel_idle: v0.4 model 0x2A
[    0.448475] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.646745] ACPI: AC Adapter [ADP0] (on-line)
[    0.646849] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    0.646854] ACPI: Power Button [PWRB]
[    0.646877] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[    0.646879] ACPI: Sleep Button [SLPB]
[    0.646903] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
[    0.647426] ACPI: Lid Switch [LID0]
[    0.647459] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    0.647462] ACPI: Power Button [PWRF]
[    0.647515] ACPI: Requesting acpi_cpufreq
[    0.650668] thermal LNXTHERM:00: registered as thermal_zone0
[    0.650682] ACPI: Thermal Zone [TZ00] (44 C)
[    0.650849] thermal LNXTHERM:01: registered as thermal_zone1
[    0.650851] ACPI: Thermal Zone [TZ01] (44 C)
[    0.650872] GHES: HEST is not enabled!
[    0.650948] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.655923] Linux agpgart interface v0.103
[    0.657030] brd: module loaded
[    0.657615] loop: module loaded
[    0.657883] libphy: Fixed MDIO Bus: probed
[    0.657925] tun: Universal TUN/TAP device driver, 1.6
[    0.657926] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.657955] PPP generic driver version 2.4.2
[    0.657982] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.657983] ehci-pci: EHCI PCI platform driver
[    0.658014] ehci-pci 0000:00:1a.0: setting latency timer to 64
[    0.658018] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    0.658022] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    0.658036] ehci-pci 0000:00:1a.0: debug port 2
[    0.661104] ACPI: Battery Slot [BAT0] (battery present)
[    0.661947] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    0.661964] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf060a000
[    0.670678] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    0.670725] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.670730] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.670735] usb usb1: Product: EHCI Host Controller
[    0.670739] usb usb1: Manufacturer: Linux 3.8.0-29-generic ehci_hcd
[    0.670743] usb usb1: SerialNumber: 0000:00:1a.0
[    0.670843] hub 1-0:1.0: USB hub found
[    0.670848] hub 1-0:1.0: 2 ports detected
[    0.670920] ehci-pci 0000:00:1d.0: setting latency timer to 64
[    0.670923] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    0.670927] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.670938] ehci-pci 0000:00:1d.0: debug port 2
[    0.674839] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    0.674853] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf0609000
[    0.686661] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    0.686698] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    0.686702] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.686707] usb usb2: Product: EHCI Host Controller
[    0.686711] usb usb2: Manufacturer: Linux 3.8.0-29-generic ehci_hcd
[    0.686715] usb usb2: SerialNumber: 0000:00:1d.0
[    0.686807] hub 2-0:1.0: USB hub found
[    0.686809] hub 2-0:1.0: 2 ports detected
[    0.686861] ehci-platform: EHCI generic platform driver
[    0.686867] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.686877] uhci_hcd: USB Universal Host Controller Interface driver
[    0.686998] xhci_hcd 0000:03:00.0: xHCI Host Controller
[    0.687002] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 3
[    0.687454] xhci_hcd 0000:03:00.0: irq 42 for MSI/MSI-X
[    0.687459] xhci_hcd 0000:03:00.0: irq 43 for MSI/MSI-X
[    0.687464] xhci_hcd 0000:03:00.0: irq 44 for MSI/MSI-X
[    0.687469] xhci_hcd 0000:03:00.0: irq 45 for MSI/MSI-X
[    0.687474] xhci_hcd 0000:03:00.0: irq 46 for MSI/MSI-X
[    0.687622] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    0.687624] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.687625] usb usb3: Product: xHCI Host Controller
[    0.687627] usb usb3: Manufacturer: Linux 3.8.0-29-generic xhci_hcd
[    0.687628] usb usb3: SerialNumber: 0000:03:00.0
[    0.687676] xHCI xhci_add_endpoint called for root hub
[    0.687678] xHCI xhci_check_bandwidth called for root hub
[    0.687691] hub 3-0:1.0: USB hub found
[    0.687781] hub 3-0:1.0: 2 ports detected
[    0.687852] xhci_hcd 0000:03:00.0: xHCI Host Controller
[    0.687855] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 4
[    0.687895] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[    0.687897] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.687898] usb usb4: Product: xHCI Host Controller
[    0.687899] usb usb4: Manufacturer: Linux 3.8.0-29-generic xhci_hcd
[    0.687901] usb usb4: SerialNumber: 0000:03:00.0
[    0.687943] xHCI xhci_add_endpoint called for root hub
[    0.687944] xHCI xhci_check_bandwidth called for root hub
[    0.687956] hub 4-0:1.0: USB hub found
[    0.688045] hub 4-0:1.0: 2 ports detected
[    0.688185] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    0.691594] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.691599] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.691678] mousedev: PS/2 mouse device common for all mice
[    0.691827] rtc_cmos 00:04: RTC can wake from S4
[    0.691974] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[    0.692003] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    0.692080] device-mapper: uevent: version 1.0.3
[    0.692124] device-mapper: ioctl: 4.23.1-ioctl (2012-12-18) initialised: dm-devel@redhat.com
[    0.692183] cpuidle: using governor ladder
[    0.692255] cpuidle: using governor menu
[    0.692258] ledtrig-cpu: registered to indicate activity on CPUs
[    0.692259] EFI Variables Facility v0.08 2004-May-17
[    0.692403] ashmem: initialized
[    0.692505] TCP: cubic registered
[    0.692572] NET: Registered protocol family 10
[    0.692707] NET: Registered protocol family 17
[    0.692714] Key type dns_resolver registered
[    0.692884] Loading module verification certificates
[    0.693736] MODSIGN: Loaded cert 'Magrathea: Glacier signing key: 38550890b1fce75cc801d8fb942703db919b9386'
[    0.693745] registered taskstats version 1
[    0.695600] Key type trusted registered
[    0.697031] Key type encrypted registered
[    0.699045] rtc_cmos 00:04: setting system clock to 2013-09-05 06:13:51 UTC (1378361631)
[    0.699608] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.699610] EDD information not available.
[    0.701039] Freeing unused kernel memory: 1012k freed
[    0.701178] Write protecting the kernel read-only data: 12288k
[    0.703815] Freeing unused kernel memory: 1012k freed
[    0.706238] Freeing unused kernel memory: 1008k freed
[    0.706444] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[    0.718689] udevd[109]: starting version 175
[    0.944124] Disabling lock debugging due to kernel taint
[    0.944783] ahci 0000:00:1f.2: version 3.0
[    0.944857] ahci 0000:00:1f.2: irq 47 for MSI/MSI-X
[    0.944922] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x1 impl SATA mode
[    0.944926] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst
[    0.944931] ahci 0000:00:1f.2: setting latency timer to 64
[    0.946756] scsi0 : ahci
[    0.947298] scsi1 : ahci
[    0.947524] scsi2 : ahci
[    0.947615] scsi3 : ahci
[    0.947692] scsi4 : ahci
[    0.947937] scsi5 : ahci
[    0.947993] ata1: SATA max UDMA/133 abar m2048@0xf0608000 port 0xf0608100 irq 47
[    0.947996] ata2: DUMMY
[    0.947997] ata3: DUMMY
[    0.947998] ata4: DUMMY
[    0.948000] ata5: DUMMY
[    0.948001] ata6: DUMMY
[    0.982312] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.114666] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[    1.114676] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.115028] hub 1-1:1.0: USB hub found
[    1.115138] hub 1-1:1.0: 6 ports detected
[    1.226172] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    1.266072] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.266624] ata1.00: ATA-9: MTFDDAT256MAM-1K1AB, 070F, max UDMA/100
[    1.266627] ata1.00: 500118192 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    1.267193] ata1.00: configured for UDMA/100
[    1.267455] scsi 0:0:0:0: Direct-Access     ATA      MTFDDAT256MAM-1K 070F PQ: 0 ANSI: 5
[    1.267594] sd 0:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB)
[    1.267611] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.267685] sd 0:0:0:0: [sda] Write Protect is off
[    1.267690] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.267715] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.268552]  sda: sda1 sda2 < sda5 >
[    1.268929] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.309234] bio: create slab <bio-1> at 1
[    1.358327] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[    1.358337] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.358605] hub 2-1:1.0: USB hub found
[    1.358666] hub 2-1:1.0: 8 ports detected
[    1.417859] tsc: Refined TSC clocksource calibration: 1696.146 MHz
[    1.417874] Switching to clocksource tsc
[    1.428637] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[    1.525731] usb 3-1: new full-speed USB device number 2 using xhci_hcd
[    1.541108] init: ureadahead main process (291) terminated with status 5
[    1.546242] usb 3-1: New USB device found, idVendor=0a46, idProduct=9601
[    1.546247] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.546250] usb 3-1: Product: DM9601 USB NIC          
[    1.546252] usb 3-1: Manufacturer: DM9601 USB NIC  
[    1.546254] usb 3-1: SerialNumber: 9601
[    1.582905] Adding 6975484k swap on /dev/mapper/ubuntu-swap_1.  Priority:-1 extents:1 across:6975484k SS
[    1.610432] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro
[    1.617609] usb 1-1.5: new high-speed USB device number 3 using ehci-pci
[    1.643413] udevd[405]: starting version 175
[    1.675899] lp: driver loaded but no devices found
[    1.684913] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null)
[    1.779241] ppdev: user-space parallel port driver
[    1.794127] Bluetooth: Core ver 2.16
[    1.794151] NET: Registered protocol family 31
[    1.794153] Bluetooth: HCI device and connection manager initialized
[    1.794160] Bluetooth: HCI socket layer initialized
[    1.794163] Bluetooth: L2CAP socket layer initialized
[    1.794169] Bluetooth: SCO socket layer initialized
[    1.804200] Bluetooth: RFCOMM TTY layer initialized
[    1.804210] Bluetooth: RFCOMM socket layer initialized
[    1.804211] Bluetooth: RFCOMM ver 1.11
[    1.807797] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    1.807801] Bluetooth: BNEP filters: protocol multicast
[    1.807810] Bluetooth: BNEP socket layer initialized
[    1.814560] type=1400 audit(1378361632.612:2): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=649 comm="apparmor_parser"
[    1.814955] type=1400 audit(1378361632.612:3): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=649 comm="apparmor_parser"
[    1.886060] wmi: Mapper loaded
[    1.892020] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20121018/utaddress-251)
[    1.892029] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    1.892034] ACPI Warning: 0x0000000000000540-0x000000000000054f SystemIO conflicts with Region \GPIO 1 (20121018/utaddress-251)
[    1.892039] ACPI Warning: 0x0000000000000540-0x000000000000054f SystemIO conflicts with Region \_SB_.IAOE.GPIO 2 (20121018/utaddress-251)
[    1.892043] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    1.892044] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20121018/utaddress-251)
[    1.892048] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \_SB_.IAOE.GPIO 2 (20121018/utaddress-251)
[    1.892051] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    1.892053] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 1 (20121018/utaddress-251)
[    1.892056] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \_SB_.IAOE.GPIO 2 (20121018/utaddress-251)
[    1.892059] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    1.892061] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    1.894187] mei 0000:00:16.0: setting latency timer to 64
[    1.894253] mei 0000:00:16.0: irq 48 for MSI/MSI-X
[    1.907964] cfg80211: Calling CRDA to update world regulatory domain
[    1.911485] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x25
[    1.911732] [drm] Initialized drm 1.1.0 20060810
[    1.920655] [drm] Memory usable by graphics device = 2048M
[    1.920662] i915 0000:00:02.0: setting latency timer to 64
[    1.927066] Intel(R) Wireless WiFi driver for Linux, in-tree:
[    1.927069] Copyright(c) 2003-2012 Intel Corporation
[    1.927480] iwlwifi 0000:02:00.0: irq 49 for MSI/MSI-X
[    1.929997] iwlwifi 0000:02:00.0: loaded firmware version 18.168.6.1
[    1.946593] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUG disabled
[    1.946597] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUGFS enabled
[    1.946600] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
[    1.946602] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEVICE_TESTMODE enabled
[    1.946604] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_P2P disabled
[    1.946606] iwlwifi 0000:02:00.0: Detected Intel(R) Centrino(R) Advanced-N 6230 AGN, REV=0xB0
[    1.946701] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
[    1.952673] i915 0000:00:02.0: irq 50 for MSI/MSI-X
[    1.952710] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[    1.952712] [drm] Driver supports precise vblank timestamp query.
[    1.952765] [drm] applying no-PCH_PWM_ENABLE quirk
[    1.952792] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    1.953886] dm9601 3-1:1.0 eth0: register 'dm9601' at usb-0000:03:00.0-1, Davicom DM9601 USB Ethernet, 00:60:78:05:59:c7
[    1.954021] usbcore: registered new interface driver dm9601
[    1.970969] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[    1.982862] type=1400 audit(1378361632.780:4): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=855 comm="apparmor_parser"
[    1.983232] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[    1.983261] type=1400 audit(1378361632.780:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=855 comm="apparmor_parser"
[    1.983487] type=1400 audit(1378361632.780:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=855 comm="apparmor_parser"
[    1.992412] usb 1-1.5: New USB device found, idVendor=1bcf, idProduct=288f
[    1.992417] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.992420] usb 1-1.5: Product: Laptop_Integrated_Webcam_1.3M
[    1.992422] usb 1-1.5: Manufacturer: CN01RH717248724RD463A00
[    2.035400] init: failsafe main process (874) killed by TERM signal
[    2.041563] input: Dell WMI hotkeys as /devices/virtual/input/input5
[    2.046965] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x25
[    2.068704] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x25
[    2.070656] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x25
[    2.075222] cfg80211: World regulatory domain updated:
[    2.075226] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[    2.075229] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    2.075231] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[    2.075232] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[    2.075234] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    2.075236] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    2.079797] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    2.091953] type=1400 audit(1378361632.888:7): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1029 comm="apparmor_parser"
[    2.092354] type=1400 audit(1378361632.888:8): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1029 comm="apparmor_parser"
[    2.092548] type=1400 audit(1378361632.888:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1029 comm="apparmor_parser"
[    2.093567] type=1400 audit(1378361632.892:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=1028 comm="apparmor_parser"
[    2.182444] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
[    2.189046] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0
[    2.192855] [drm] GMBUS [i915 gmbus vga] timed out, falling back to bit banging on pin 2
[    2.222217] init: alsa-restore main process (1126) terminated with status 19
[    2.223695] Linux video capture interface: v2.00
[    2.241161] uvcvideo: Found UVC 1.00 device Laptop_Integrated_Webcam_1.3M (1bcf:288f)
[    2.260790] fbcon: inteldrmfb (fb0) is primary device
[    2.280811] usb 2-1.5: new full-speed USB device number 3 using ehci-pci
[    2.321855] input: Laptop_Integrated_Webcam_1.3M as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.0/input/input6
[    2.321988] usbcore: registered new interface driver uvcvideo
[    2.321989] USB Video Class driver (1.1.1)
[    2.376948] usb 2-1.5: New USB device found, idVendor=8086, idProduct=0189
[    2.376949] usb 2-1.5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.382881] usbcore: registered new interface driver btusb
[    2.590930] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
[    2.597535] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0
[    2.815085] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[    2.815352] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[    2.819133] dm9601 3-1:1.0 eth2: link down
[    2.819857] IPv6: ADDRCONF(NETDEV_UP): eth2: link is not ready
[    2.820140] IPv6: ADDRCONF(NETDEV_UP): eth2: link is not ready
[    3.019918] Console: switching to colour frame buffer device 170x48
[    3.022210] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    3.022212] i915 0000:00:02.0: registered panic notifier
[    3.031944] acpi device:1e: registered as cooling_device4
[    3.032085] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    3.032125] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7
[    3.032201] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[    3.032318] snd_hda_intel 0000:00:1b.0: irq 51 for MSI/MSI-X
[    3.052423] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[    3.053283] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[    3.053579] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[    3.140475] input: CyPS/2 Cypress Trackpad as /devices/platform/i8042/serio1/input/input11
[    3.568458] init: plymouth-stop pre-start process (1507) terminated with status 1
[    3.779146] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[    6.693067] init: rfkill-restore main process (461) terminated with status 2
[    6.693100] init: rfkill-restore main process ended, respawning
[   18.778247] IPv6: ADDRCONF(NETDEV_CHANGE): eth2: link becomes ready
[   18.780810] dm9601 3-1:1.0 eth2: link up, 100Mbps, full-duplex, lpa 0xC5E1
[   30.531632] wlan0: authenticate with 06:27:22:e3:60:91
[   30.540658] wlan0: send auth to 06:27:22:e3:60:91 (try 1/3)
[   30.543332] wlan0: authenticated
[   30.547606] wlan0: associate with 06:27:22:e3:60:91 (try 1/3)
[   30.551238] wlan0: RX AssocResp from 06:27:22:e3:60:91 (capab=0x431 status=0 aid=1)
[   30.559518] wlan0: associated
[   30.559546] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   30.559635] cfg80211: Calling CRDA for country: EG
[   30.562860] cfg80211: Regulatory domain changed to country: EG
[   30.562863] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   30.562865] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[   30.562866] cfg80211:   (5170000 KHz - 5250000 KHz @ 20000 KHz), (N/A, 2000 mBm)
[   30.562867] cfg80211:   (5250000 KHz - 5330000 KHz @ 20000 KHz), (N/A, 2000 mBm)
[   50.809675] cfg80211: Calling CRDA to update world regulatory domain
[   50.812575] cfg80211: World regulatory domain updated:
[   50.812579] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   50.812580] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   50.812582] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   50.812583] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   50.812584] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   50.812585] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   54.114760] wlan0: authenticate with 06:27:22:e3:60:91
[   54.116744] wlan0: send auth to 06:27:22:e3:60:91 (try 1/3)
[   54.119402] wlan0: authenticated
[   54.123224] wlan0: associate with 06:27:22:e3:60:91 (try 1/3)
[   54.126946] wlan0: RX AssocResp from 06:27:22:e3:60:91 (capab=0x431 status=0 aid=1)
[   54.137186] wlan0: associated
[   54.137270] cfg80211: Calling CRDA for country: EG
[   54.140111] cfg80211: Regulatory domain changed to country: EG
[   54.140114] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   54.140116] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[   54.140117] cfg80211:   (5170000 KHz - 5250000 KHz @ 20000 KHz), (N/A, 2000 mBm)
[   54.140118] cfg80211:   (5250000 KHz - 5330000 KHz @ 20000 KHz), (N/A, 2000 mBm)
[  553.454539] cfg80211: Calling CRDA to update world regulatory domain
[  553.463445] cfg80211: World regulatory domain updated:
[  553.463454] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[  553.463460] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  553.463465] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[  553.463468] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[  553.463472] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  553.463475] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  556.720353] wlan0: authenticate with 06:27:22:e3:60:91
[  556.723258] wlan0: send auth to 06:27:22:e3:60:91 (try 1/3)
[  556.726025] wlan0: authenticated
[  556.730365] wlan0: associate with 06:27:22:e3:60:91 (try 1/3)
[  556.734149] wlan0: RX AssocResp from 06:27:22:e3:60:91 (capab=0x431 status=0 aid=1)
[  556.744342] wlan0: associated
[  556.744492] cfg80211: Calling CRDA for country: EG
[  556.753273] cfg80211: Regulatory domain changed to country: EG
[  556.753282] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[  556.753287] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[  556.753291] cfg80211:   (5170000 KHz - 5250000 KHz @ 20000 KHz), (N/A, 2000 mBm)
[  556.753295] cfg80211:   (5250000 KHz - 5330000 KHz @ 20000 KHz), (N/A, 2000 mBm)
[  637.354073] cfg80211: Calling CRDA to update world regulatory domain
[  637.364031] cfg80211: World regulatory domain updated:
[  637.364039] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[  637.364067] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  637.364074] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[  637.364079] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[  637.364083] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  637.364089] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  640.615151] wlan0: authenticate with 06:27:22:e3:60:91
[  640.616482] wlan0: send auth to 06:27:22:e3:60:91 (try 1/3)
[  640.619036] wlan0: authenticated
[  640.621993] wlan0: associate with 06:27:22:e3:60:91 (try 1/3)
[  640.632328] wlan0: RX AssocResp from 06:27:22:e3:60:91 (capab=0x431 status=0 aid=1)
[  640.640677] wlan0: associated
[  640.640818] cfg80211: Calling CRDA for country: EG
[  640.649381] cfg80211: Regulatory domain changed to country: EG
[  640.649389] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[  640.649395] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[  640.649399] cfg80211:   (5170000 KHz - 5250000 KHz @ 20000 KHz), (N/A, 2000 mBm)
[  640.649402] cfg80211:   (5250000 KHz - 5330000 KHz @ 20000 KHz), (N/A, 2000 mBm)
[  645.637994] wlan0: deauthenticated from 06:27:22:e3:60:91 (Reason: 2)
[  645.640719] cfg80211: Calling CRDA to update world regulatory domain
[  645.649301] cfg80211: World regulatory domain updated:
[  645.649310] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[  645.649316] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  645.649322] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[  645.649326] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[  645.649329] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  645.649332] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  648.950046] wlan0: authenticate with 06:27:22:e3:60:91
[  648.952593] wlan0: send auth to 06:27:22:e3:60:91 (try 1/3)
[  648.954965] wlan0: authenticated
[  648.956022] wlan0: associate with 06:27:22:e3:60:91 (try 1/3)
[  649.159780] wlan0: associate with 06:27:22:e3:60:91 (try 2/3)
[  649.165303] wlan0: RX AssocResp from 06:27:22:e3:60:91 (capab=0x431 status=0 aid=1)
[  649.176154] wlan0: associated
[  649.176316] cfg80211: Calling CRDA for country: EG
[  649.185048] cfg80211: Regulatory domain changed to country: EG
[  649.185057] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[  649.185062] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[  649.185066] cfg80211:   (5170000 KHz - 5250000 KHz @ 20000 KHz), (N/A, 2000 mBm)
[  649.185069] cfg80211:   (5250000 KHz - 5330000 KHz @ 20000 KHz), (N/A, 2000 mBm)
[  651.162680] wlan0: deauthenticated from 06:27:22:e3:60:91 (Reason: 2)
[  651.167652] cfg80211: Calling CRDA to update world regulatory domain
[  651.176301] cfg80211: World regulatory domain updated:
[  651.176311] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[  651.176316] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  651.176320] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[  651.176324] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[  651.176327] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  651.176331] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  652.688601] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  654.449283] wlan0: authenticate with 06:27:22:e3:60:91
[  654.458748] wlan0: send auth to 06:27:22:e3:60:91 (try 1/3)
[  654.461140] wlan0: authenticated
[  654.465382] wlan0: associate with 06:27:22:e3:60:91 (try 1/3)
[  654.469124] wlan0: RX AssocResp from 06:27:22:e3:60:91 (capab=0x431 status=0 aid=1)
[  654.479879] wlan0: associated
[  654.479946] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[  654.480095] cfg80211: Calling CRDA for country: EG
[  654.488515] cfg80211: Regulatory domain changed to country: EG
[  654.488523] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[  654.488528] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[  654.488532] cfg80211:   (5170000 KHz - 5250000 KHz @ 20000 KHz), (N/A, 2000 mBm)
[  654.488535] cfg80211:   (5250000 KHz - 5330000 KHz @ 20000 KHz), (N/A, 2000 mBm)
[  658.521134] wlan0: deauthenticated from 06:27:22:e3:60:91 (Reason: 2)
[  658.524526] cfg80211: Calling CRDA to update world regulatory domain
[  658.532866] cfg80211: World regulatory domain updated:
[  658.532869] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[  658.532871] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  658.532872] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[  658.532873] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[  658.532874] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  658.532875] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  661.830602] wlan0: authenticate with 06:27:22:e3:60:91
[  661.833381] wlan0: send auth to 06:27:22:e3:60:91 (try 1/3)
[  661.835715] wlan0: authenticated
[  661.836544] wlan0: associate with 06:27:22:e3:60:91 (try 1/3)
[  661.843766] wlan0: RX AssocResp from 06:27:22:e3:60:91 (capab=0x431 status=0 aid=1)
[  661.852029] wlan0: associated
[  661.852171] cfg80211: Calling CRDA for country: EG
[  661.860611] cfg80211: Regulatory domain changed to country: EG
[  661.860623] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[  661.860631] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[  661.860637] cfg80211:   (5170000 KHz - 5250000 KHz @ 20000 KHz), (N/A, 2000 mBm)
[  661.860641] cfg80211:   (5250000 KHz - 5330000 KHz @ 20000 KHz), (N/A, 2000 mBm)
[  663.675337] IPv6: ADDRCONF(NETDEV_UP): eth2: link is not ready
[  666.847030] wlan0: deauthenticated from 06:27:22:e3:60:91 (Reason: 2)
[  666.861047] cfg80211: Calling CRDA to update world regulatory domain
[  666.869198] cfg80211: World regulatory domain updated:
[  666.869207] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[  666.869212] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  666.869217] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[  666.869220] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[  666.869224] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  666.869227] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  666.955040] IPv6: ADDRCONF(NETDEV_CHANGE): eth2: link becomes ready
[  666.957054] dm9601 3-1:1.0 eth2: link up, 100Mbps, full-duplex, lpa 0xC5E1
[  670.142138] wlan0: authenticate with 06:27:22:e3:60:91
[  670.144944] wlan0: send auth to 06:27:22:e3:60:91 (try 1/3)
[  670.147324] wlan0: authenticated
[  670.150659] wlan0: associate with 06:27:22:e3:60:91 (try 1/3)
[  670.154397] wlan0: RX AssocResp from 06:27:22:e3:60:91 (capab=0x431 status=0 aid=1)
[  670.167831] wlan0: associated
[  670.167995] cfg80211: Calling CRDA for country: EG
[  670.185179] cfg80211: Regulatory domain changed to country: EG
[  670.185191] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[  670.185199] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[  670.185206] cfg80211:   (5170000 KHz - 5250000 KHz @ 20000 KHz), (N/A, 2000 mBm)
[  670.185213] cfg80211:   (5250000 KHz - 5330000 KHz @ 20000 KHz), (N/A, 2000 mBm)
[  768.183364] cfg80211: Calling CRDA to update world regulatory domain
[  768.193868] cfg80211: World regulatory domain updated:
[  768.193880] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[  768.193887] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  768.193893] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[  768.193898] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[  768.193902] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  768.193907] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  771.461496] wlan0: authenticate with 06:27:22:e3:60:91
[  771.464075] wlan0: send auth to 06:27:22:e3:60:91 (try 1/3)
[  771.467130] wlan0: authenticated
[  771.470405] wlan0: associate with 06:27:22:e3:60:91 (try 1/3)
[  771.474166] wlan0: RX AssocResp from 06:27:22:e3:60:91 (capab=0x431 status=0 aid=1)
[  771.481835] wlan0: associated
[  771.481978] cfg80211: Calling CRDA for country: EG
[  771.490563] cfg80211: Regulatory domain changed to country: EG
[  771.490572] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[  771.490578] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[  771.490582] cfg80211:   (5170000 KHz - 5250000 KHz @ 20000 KHz), (N/A, 2000 mBm)
[  771.490586] cfg80211:   (5250000 KHz - 5330000 KHz @ 20000 KHz), (N/A, 2000 mBm)
[  822.072850] cfg80211: Calling CRDA to update world regulatory domain
[  822.082288] cfg80211: World regulatory domain updated:
[  822.082297] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[  822.082303] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  822.082307] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[  822.082311] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[  822.082315] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  822.082319] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  833.506134] wlan0: authenticate with 06:27:22:e3:60:91
[  833.508047] wlan0: direct probe to 06:27:22:e3:60:91 (try 1/3)
[  833.708804] wlan0: send auth to 06:27:22:e3:60:91 (try 2/3)
[  833.710903] wlan0: authenticated
[  833.712797] wlan0: associate with 06:27:22:e3:60:91 (try 1/3)
[  833.716533] wlan0: RX AssocResp from 06:27:22:e3:60:91 (capab=0x431 status=0 aid=1)
[  833.724422] wlan0: associated
[  833.724584] cfg80211: Calling CRDA for country: EG
[  833.733451] cfg80211: Regulatory domain changed to country: EG
[  833.733460] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[  833.733466] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[  833.733470] cfg80211:   (5170000 KHz - 5250000 KHz @ 20000 KHz), (N/A, 2000 mBm)
[  833.733474] cfg80211:   (5250000 KHz - 5330000 KHz @ 20000 KHz), (N/A, 2000 mBm)
[  837.395513] wlan0: deauthenticating from 06:27:22:e3:60:91 by local choice (reason=3)
[  837.412540] cfg80211: Calling CRDA to update world regulatory domain
[  837.434582] cfg80211: World regulatory domain updated:
[  837.434587] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[  837.434590] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  837.434592] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[  837.434593] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[  837.434595] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  837.434597] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  840.639499] wlan0: authenticate with 06:27:22:e3:60:91
[  840.652728] wlan0: send auth to 06:27:22:e3:60:91 (try 1/3)
[  840.655228] wlan0: authenticated
[  840.657011] wlan0: associate with 06:27:22:e3:60:91 (try 1/3)
[  840.660695] wlan0: RX AssocResp from 06:27:22:e3:60:91 (capab=0x431 status=0 aid=1)
[  840.668115] wlan0: associated
[  840.668291] cfg80211: Calling CRDA for country: EG
[  840.673969] cfg80211: Regulatory domain changed to country: EG
[  840.673973] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[  840.673974] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[  840.673976] cfg80211:   (5170000 KHz - 5250000 KHz @ 20000 KHz), (N/A, 2000 mBm)
[  840.673977] cfg80211:   (5250000 KHz - 5330000 KHz @ 20000 KHz), (N/A, 2000 mBm)
[  851.271749] audit_printk_skb: 43 callbacks suppressed
[  851.271758] type=1400 audit(1378362482.914:25): apparmor="DENIED" operation="capable" parent=1 profile="/usr/sbin/cupsd" pid=680 comm="cupsd" pid=680 comm="cupsd" capability=36  capname="block_suspend"
[  955.894838] cfg80211: Calling CRDA to update world regulatory domain
[  955.903505] cfg80211: World regulatory domain updated:
[  955.903514] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[  955.903520] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  955.903524] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[  955.903528] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[  955.903532] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  955.903535] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  959.151752] wlan0: authenticate with 06:27:22:e3:60:91
[  959.154267] wlan0: send auth to 06:27:22:e3:60:91 (try 1/3)
[  959.156693] wlan0: authenticated
[  959.158728] wlan0: associate with 06:27:22:e3:60:91 (try 1/3)
[  959.162489] wlan0: RX AssocResp from 06:27:22:e3:60:91 (capab=0x431 status=0 aid=1)
[  959.172844] wlan0: associated
[  959.172944] cfg80211: Calling CRDA for country: EG
[  959.181010] cfg80211: Regulatory domain changed to country: EG
[  959.181019] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[  959.181025] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[  959.181029] cfg80211:   (5170000 KHz - 5250000 KHz @ 20000 KHz), (N/A, 2000 mBm)
[  959.181033] cfg80211:   (5250000 KHz - 5330000 KHz @ 20000 KHz), (N/A, 2000 mBm)
[ 1010.829108] cfg80211: Calling CRDA to update world regulatory domain
[ 1010.837856] cfg80211: World regulatory domain updated:
[ 1010.837865] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 1010.837871] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 1010.837875] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 1010.837878] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 1010.837882] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 1010.837885] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 1014.086484] wlan0: authenticate with 06:27:22:e3:60:91
[ 1014.088843] wlan0: send auth to 06:27:22:e3:60:91 (try 1/3)
[ 1014.093896] wlan0: authenticated
[ 1014.096911] wlan0: associate with 06:27:22:e3:60:91 (try 1/3)
[ 1014.102188] wlan0: RX AssocResp from 06:27:22:e3:60:91 (capab=0x431 status=0 aid=1)
[ 1014.109651] wlan0: associated
[ 1014.109714] cfg80211: Calling CRDA for country: EG
[ 1014.112853] cfg80211: Regulatory domain changed to country: EG
[ 1014.112857] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 1014.112858] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 1014.112860] cfg80211:   (5170000 KHz - 5250000 KHz @ 20000 KHz), (N/A, 2000 mBm)
[ 1014.112861] cfg80211:   (5250000 KHz - 5330000 KHz @ 20000 KHz), (N/A, 2000 mBm)
[ 1117.705252] cfg80211: Calling CRDA to update world regulatory domain
[ 1117.714599] cfg80211: World regulatory domain updated:
[ 1117.714608] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 1117.714614] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 1117.714618] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 1117.714622] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 1117.714625] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 1117.714629] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 1120.988045] wlan0: authenticate with 06:27:22:e3:60:91
[ 1120.989607] wlan0: send auth to 06:27:22:e3:60:91 (try 1/3)
[ 1120.992173] wlan0: authenticated
[ 1120.993049] wlan0: associate with 06:27:22:e3:60:91 (try 1/3)
[ 1120.996767] wlan0: RX AssocResp from 06:27:22:e3:60:91 (capab=0x431 status=0 aid=1)
[ 1121.004469] wlan0: associated
[ 1121.004604] cfg80211: Calling CRDA for country: EG
[ 1121.013170] cfg80211: Regulatory domain changed to country: EG
[ 1121.013179] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 1121.013184] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 1121.013188] cfg80211:   (5170000 KHz - 5250000 KHz @ 20000 KHz), (N/A, 2000 mBm)
[ 1121.013192] cfg80211:   (5250000 KHz - 5330000 KHz @ 20000 KHz), (N/A, 2000 mBm)
[ 1141.680467] cfg80211: Calling CRDA to update world regulatory domain
[ 1141.685445] cfg80211: World regulatory domain updated:
[ 1141.685449] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 1141.685451] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 1141.685454] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 1141.685456] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 1141.685457] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 1141.685459] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 1144.962415] wlan0: authenticate with 06:27:22:e3:60:91
[ 1144.964392] wlan0: send auth to 06:27:22:e3:60:91 (try 1/3)
[ 1144.967466] wlan0: authenticated
[ 1144.968343] wlan0: associate with 06:27:22:e3:60:91 (try 1/3)
[ 1144.972016] wlan0: RX AssocResp from 06:27:22:e3:60:91 (capab=0x431 status=0 aid=1)
[ 1144.980159] wlan0: associated
[ 1144.980348] cfg80211: Calling CRDA for country: EG
[ 1144.985843] cfg80211: Regulatory domain changed to country: EG
[ 1144.985847] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 1144.985849] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 1144.985850] cfg80211:   (5170000 KHz - 5250000 KHz @ 20000 KHz), (N/A, 2000 mBm)
[ 1144.985851] cfg80211:   (5250000 KHz - 5330000 KHz @ 20000 KHz), (N/A, 2000 mBm)
[ 1791.869758] cfg80211: Calling CRDA to update world regulatory domain
[ 1791.878440] cfg80211: World regulatory domain updated:
[ 1791.878450] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 1791.878455] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 1791.878459] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 1791.878463] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 1791.878467] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 1791.878470] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 1803.333152] wlan0: authenticate with 06:27:22:e3:60:91
[ 1803.335705] wlan0: send auth to 06:27:22:e3:60:91 (try 1/3)
[ 1803.338224] wlan0: authenticated
[ 1803.338493] wlan0: waiting for beacon from 06:27:22:e3:60:91
[ 1807.225492] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 1811.627748] wlan0: authenticate with 06:27:22:e3:60:91
[ 1811.637116] wlan0: send auth to 06:27:22:e3:60:91 (try 1/3)
[ 1811.639569] wlan0: authenticated
[ 1811.639711] wlan0: waiting for beacon from 06:27:22:e3:60:91
[ 1811.738363] wlan0: associate with 06:27:22:e3:60:91 (try 1/3)
[ 1811.741986] wlan0: RX AssocResp from 06:27:22:e3:60:91 (capab=0x431 status=0 aid=1)
[ 1811.749772] wlan0: associated
[ 1811.749826] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 1811.749896] cfg80211: Calling CRDA for country: EG
[ 1811.757694] cfg80211: Regulatory domain changed to country: EG
[ 1811.757704] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 1811.757709] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 1811.757714] cfg80211:   (5170000 KHz - 5250000 KHz @ 20000 KHz), (N/A, 2000 mBm)
[ 1811.757717] cfg80211:   (5250000 KHz - 5330000 KHz @ 20000 KHz), (N/A, 2000 mBm)
[ 1816.790056] wlan0: deauthenticated from 06:27:22:e3:60:91 (Reason: 2)
[ 1816.792583] cfg80211: Calling CRDA to update world regulatory domain
[ 1816.795841] cfg80211: World regulatory domain updated:
[ 1816.795844] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 1816.795846] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 1816.795847] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 1816.795849] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 1816.795850] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 1816.795851] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 1820.073578] wlan0: authenticate with 06:27:22:e3:60:91
[ 1820.075829] wlan0: send auth to 06:27:22:e3:60:91 (try 1/3)
[ 1820.078194] wlan0: authenticated
[ 1820.080410] wlan0: associate with 06:27:22:e3:60:91 (try 1/3)
[ 1820.084099] wlan0: RX AssocResp from 06:27:22:e3:60:91 (capab=0x431 status=0 aid=1)
[ 1820.091586] wlan0: associated
[ 1820.091733] cfg80211: Calling CRDA for country: EG
[ 1820.099725] cfg80211: Regulatory domain changed to country: EG
[ 1820.099734] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 1820.099739] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 1820.099744] cfg80211:   (5170000 KHz - 5250000 KHz @ 20000 KHz), (N/A, 2000 mBm)
[ 1820.099747] cfg80211:   (5250000 KHz - 5330000 KHz @ 20000 KHz), (N/A, 2000 mBm)
[ 1911.520250] iwlwifi 0000:02:00.0: fail to flush all tx fifo queues
[ 1913.517864] iwlwifi 0000:02:00.0: Error sending REPLY_ADD_STA: time out after 2000ms.
[ 1913.517884] iwlwifi 0000:02:00.0: Current CMD queue read_ptr 172 write_ptr 173
[ 1913.517896] wlan0: HW problem - can not stop rx aggregation for tid 0
[ 1915.515404] iwlwifi 0000:02:00.0: Error sending REPLY_ADD_STA: time out after 2000ms.
[ 1915.515430] iwlwifi 0000:02:00.0: Current CMD queue read_ptr 172 write_ptr 174
[ 1915.515441] wlan0: failed to remove key (0, 06:27:22:e3:60:91) from hardware (-110)
[ 1917.516993] iwlwifi 0000:02:00.0: Error sending REPLY_QOS_PARAM: time out after 2000ms.
[ 1917.517005] iwlwifi 0000:02:00.0: Current CMD queue read_ptr 172 write_ptr 175
[ 1917.517012] iwlwifi 0000:02:00.0: Failed to update QoS
[ 1919.514697] iwlwifi 0000:02:00.0: Error sending REPLY_RXON: time out after 2000ms.
[ 1919.514710] iwlwifi 0000:02:00.0: Current CMD queue read_ptr 172 write_ptr 176
[ 1919.514717] iwlwifi 0000:02:00.0: Error clearing ASSOC_MSK on BSS (-110)
[ 1921.512320] iwlwifi 0000:02:00.0: Error sending REPLY_RXON: time out after 2000ms.
[ 1921.512333] iwlwifi 0000:02:00.0: Current CMD queue read_ptr 172 write_ptr 177
[ 1921.512340] iwlwifi 0000:02:00.0: Error clearing ASSOC_MSK on BSS (-110)
[ 1923.513920] iwlwifi 0000:02:00.0: Error sending REPLY_ADD_STA: time out after 2000ms.
[ 1923.513933] iwlwifi 0000:02:00.0: Current CMD queue read_ptr 172 write_ptr 178
[ 1923.513944] wlan0: failed to remove key (1, ff:ff:ff:ff:ff:ff) from hardware (-110)
[ 1923.514227] cfg80211: Calling CRDA to update world regulatory domain
[ 1925.511498] iwlwifi 0000:02:00.0: Error sending REPLY_RXON: time out after 2000ms.
[ 1925.511515] iwlwifi 0000:02:00.0: Current CMD queue read_ptr 172 write_ptr 179
[ 1925.511529] iwlwifi 0000:02:00.0: Error clearing ASSOC_MSK on BSS (-110)
[ 1927.517109] iwlwifi 0000:02:00.0: fail to flush all tx fifo queues
[ 1929.514652] iwlwifi 0000:02:00.0: Error sending POWER_TABLE_CMD: time out after 2000ms.
[ 1929.514665] iwlwifi 0000:02:00.0: Current CMD queue read_ptr 172 write_ptr 180
[ 1929.514673] iwlwifi 0000:02:00.0: set power fail, ret = -110
[ 1931.512335] iwlwifi 0000:02:00.0: Error sending REPLY_RXON: time out after 2000ms.
[ 1931.512357] iwlwifi 0000:02:00.0: Current CMD queue read_ptr 172 write_ptr 181
[ 1931.512369] iwlwifi 0000:02:00.0: Error clearing ASSOC_MSK on BSS (-110)
[ 1933.509973] iwlwifi 0000:02:00.0: Error sending REPLY_SCAN_CMD: time out after 2000ms.
[ 1933.509986] iwlwifi 0000:02:00.0: Current CMD queue read_ptr 172 write_ptr 182
[ 1933.510445] cfg80211: World regulatory domain updated:
[ 1933.510456] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 1933.510465] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 1933.510472] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 1933.510479] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 1933.510485] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 1933.510491] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 1935.507546] iwlwifi 0000:02:00.0: Error sending REPLY_SCAN_CMD: time out after 2000ms.
[ 1935.507571] iwlwifi 0000:02:00.0: Current CMD queue read_ptr 172 write_ptr 183
[ 1937.505205] iwlwifi 0000:02:00.0: Error sending REPLY_SCAN_CMD: time out after 2000ms.
[ 1937.505218] iwlwifi 0000:02:00.0: Current CMD queue read_ptr 172 write_ptr 184
[ 1940.501614] iwlwifi 0000:02:00.0: Error sending REPLY_SCAN_CMD: time out after 2000ms.
[ 1940.501627] iwlwifi 0000:02:00.0: Current CMD queue read_ptr 172 write_ptr 185
[ 1943.497976] iwlwifi 0000:02:00.0: Error sending REPLY_SCAN_CMD: time out after 2000ms.
[ 1943.497988] iwlwifi 0000:02:00.0: Current CMD queue read_ptr 172 write_ptr 186
[ 1946.494411] iwlwifi 0000:02:00.0: Error sending REPLY_SCAN_CMD: time out after 2000ms.
[ 1946.494435] iwlwifi 0000:02:00.0: Current CMD queue read_ptr 172 write_ptr 187
[ 1949.490719] iwlwifi 0000:02:00.0: Error sending REPLY_SCAN_CMD: time out after 2000ms.
[ 1949.490725] iwlwifi 0000:02:00.0: Current CMD queue read_ptr 172 write_ptr 188
[ 1949.490790] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 1952.487162] iwlwifi 0000:02:00.0: Error sending REPLY_SCAN_CMD: time out after 2000ms.
[ 1952.487180] iwlwifi 0000:02:00.0: Current CMD queue read_ptr 172 write_ptr 189
[ 1955.483581] iwlwifi 0000:02:00.0: Error sending REPLY_SCAN_CMD: time out after 2000ms.
[ 1955.483597] iwlwifi 0000:02:00.0: Current CMD queue read_ptr 172 write_ptr 190
[ 1958.480053] iwlwifi 0000:02:00.0: Error sending REPLY_SCAN_CMD: time out after 2000ms.
[ 1958.480066] iwlwifi 0000:02:00.0: Current CMD queue read_ptr 172 write_ptr 192
[ 1961.476420] iwlwifi 0000:02:00.0: Error sending REPLY_SCAN_CMD: time out after 2000ms.
[ 1961.476436] iwlwifi 0000:02:00.0: Current CMD queue read_ptr 172 write_ptr 193
[ 1964.472792] iwlwifi 0000:02:00.0: Error sending REPLY_SCAN_CMD: time out after 2000ms.
[ 1964.472799] iwlwifi 0000:02:00.0: Current CMD queue read_ptr 172 write_ptr 194
[ 1967.469278] iwlwifi 0000:02:00.0: Error sending REPLY_SCAN_CMD: time out after 2000ms.
[ 1967.469290] iwlwifi 0000:02:00.0: Current CMD queue read_ptr 172 write_ptr 195
[ 1970.465684] iwlwifi 0000:02:00.0: Error sending REPLY_SCAN_CMD: time out after 2000ms.
[ 1970.465701] iwlwifi 0000:02:00.0: Current CMD queue read_ptr 172 write_ptr 196
[ 1973.462172] iwlwifi 0000:02:00.0: Error sending REPLY_SCAN_CMD: time out after 2000ms.
[ 1973.462185] iwlwifi 0000:02:00.0: Current CMD queue read_ptr 172 write_ptr 197
[ 1976.458505] iwlwifi 0000:02:00.0: Error sending REPLY_SCAN_CMD: time out after 2000ms.
[ 1976.458527] iwlwifi 0000:02:00.0: Current CMD queue read_ptr 172 write_ptr 198
[ 1979.454987] iwlwifi 0000:02:00.0: Error sending REPLY_SCAN_CMD: time out after 2000ms.
[ 1979.455000] iwlwifi 0000:02:00.0: Current CMD queue read_ptr 172 write_ptr 199
[ 1982.451315] iwlwifi 0000:02:00.0: Error sending REPLY_SCAN_CMD: time out after 2000ms.
[ 1982.451327] iwlwifi 0000:02:00.0: Current CMD queue read_ptr 172 write_ptr 200
[ 1985.447724] iwlwifi 0000:02:00.0: Error sending REPLY_SCAN_CMD: time out after 2000ms.
[ 1985.447739] iwlwifi 0000:02:00.0: Current CMD queue read_ptr 172 write_ptr 201
[ 1988.444187] iwlwifi 0000:02:00.0: Error sending REPLY_SCAN_CMD: time out after 2000ms.
[ 1988.444200] iwlwifi 0000:02:00.0: Current CMD queue read_ptr 172 write_ptr 202
[ 1989.444699] iwlwifi 0000:02:00.0: No space in command queue
[ 1989.444713] iwlwifi 0000:02:00.0: Restarting adapter queue is full
[ 1989.444732] iwlwifi 0000:02:00.0: Error sending REPLY_SCAN_CMD: enqueue_hcmd failed: -28
[ 1989.461908] ------------[ cut here ]------------
[ 1989.461958] WARNING: at /build/buildd/linux-lts-raring-3.8.0/drivers/net/wireless/iwlwifi/iwl-io.c:150 iwl_grab_nic_access.part.1+0x6f/0x8e [iwlwifi]()
[ 1989.461965] Hardware name: Dell System XPS L321X
[ 1989.461970] Timeout waiting for hardware access (CSR_GP_CNTRL 0xffffffff)
[ 1989.461975] Modules linked in: joydev(F) snd_hda_codec_hdmi(F) snd_hda_codec_realtek(F) btusb(F) uvcvideo(F) videobuf2_core(F) videodev(F) videobuf2_vmalloc(F) videobuf2_memops(F) coretemp(F) kvm_intel(F) kvm(F) ghash_clmulni_intel(F) aesni_intel(F) ablk_helper(F) snd_hda_intel(F) snd_hda_codec(F) snd_hwdep(F) cryptd(F) lrw(F) aes_x86_64(F) xts(F) gf128mul(F) snd_pcm(F) snd_seq_midi(F) snd_rawmidi(F) snd_seq_midi_event(F) dell_wmi(F) sparse_keymap(F) snd_seq(F) snd_timer(F) snd_seq_device(F) arc4(F) dcdbas(F) iwldvm(F) snd(F) mac80211(F) dm9601(F) usbnet(F) iwlwifi(F) psmouse(F) serio_raw(F) i915(F) drm_kms_helper(F) microcode(F) drm(F) soundcore(F) snd_page_alloc(F) cfg80211(F) i2c_algo_bit(F) mei(F) lpc_ich(F) wmi(F) video(F) bnep(F) rfcomm(F) bluetooth(F) parport_pc(F) ppdev(F) mac_hid(F) binfmt_misc(F) lp(F) parport(F) ext2(F) ahci(F) libahci(F)
[ 1989.462110] Pid: 2955, comm: kworker/u:0 Tainted: GF            3.8.0-29-generic #42~precise1-Ubuntu
[ 1989.462116] Call Trace:
[ 1989.462139]  [<ffffffff81059b0f>] warn_slowpath_common+0x7f/0xc0
[ 1989.462151]  [<ffffffff81059c06>] warn_slowpath_fmt+0x46/0x50
[ 1989.462179]  [<ffffffffa02dd697>] iwl_grab_nic_access.part.1+0x6f/0x8e [iwlwifi]
[ 1989.462201]  [<ffffffffa02c778e>] iwl_grab_nic_access+0x2e/0x30 [iwlwifi]
[ 1989.462221]  [<ffffffffa02c7d56>] iwl_write_prph+0x46/0xf0 [iwlwifi]
[ 1989.462246]  [<ffffffffa02d198a>] iwl_pcie_tx_stop+0x4a/0x140 [iwlwifi]
[ 1989.462270]  [<ffffffffa02d4aea>] iwl_trans_pcie_stop_device+0xda/0x4f0 [iwlwifi]
[ 1989.462292]  [<ffffffffa03b8bda>] iwl_down+0x21a/0x320 [iwldvm]
[ 1989.462311]  [<ffffffffa03b8d2f>] iwlagn_prepare_restart+0x4f/0xd0 [iwldvm]
[ 1989.462323]  [<ffffffff8109c400>] ? idle_balance+0xd0/0x2f0
[ 1989.462342]  [<ffffffffa03b95b2>] iwl_bg_restart+0x52/0xe0 [iwldvm]
[ 1989.462352]  [<ffffffff81078ce1>] process_one_work+0x141/0x490
[ 1989.462363]  [<ffffffff81079ca8>] worker_thread+0x168/0x400
[ 1989.462373]  [<ffffffff81079b40>] ? manage_workers+0x120/0x120
[ 1989.462384]  [<ffffffff8107f1b0>] kthread+0xc0/0xd0
[ 1989.462397]  [<ffffffff8107f0f0>] ? flush_kthread_worker+0xb0/0xb0
[ 1989.462409]  [<ffffffff816fc82c>] ret_from_fork+0x7c/0xb0
[ 1989.462421]  [<ffffffff8107f0f0>] ? flush_kthread_worker+0xb0/0xb0
[ 1989.462428] ---[ end trace e9f208c388680a3e ]---
[ 1989.781821] ieee80211 phy0: Hardware restart was requested
[ 1989.781851] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
[ 1989.832484] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0
[ 1995.443716] iwlwifi 0000:02:00.0: Failed to load firmware chunk!
[ 1995.443721] iwlwifi 0000:02:00.0: Could not load the [0] uCode section
[ 1995.443725] iwlwifi 0000:02:00.0: Failed to start RT ucode: -110
[ 1995.780259] iwlwifi 0000:02:00.0: Unable to initialize device.
[ 1995.780510] iwlwifi 0000:02:00.0: Request scan called when driver not ready.
[ 1996.780673] iwlwifi 0000:02:00.0: Request scan called when driver not ready.
[ 1997.780793] iwlwifi 0000:02:00.0: Request scan called when driver not ready.
[ 1998.781060] iwlwifi 0000:02:00.0: Request scan called when driver not ready.
[ 1999.780809] iwlwifi 0000:02:00.0: Request scan called when driver not ready.
[ 2000.781512] iwlwifi 0000:02:00.0: Request scan called when driver not ready.
[ 2001.781609] iwlwifi 0000:02:00.0: Request scan called when driver not ready.
[ 2002.781752] iwlwifi 0000:02:00.0: Request scan called when driver not ready.
[ 2003.782255] iwlwifi 0000:02:00.0: Request scan called when driver not ready.
[ 2004.782406] iwlwifi 0000:02:00.0: Request scan called when driver not ready.
[ 2005.782652] iwlwifi 0000:02:00.0: Request scan called when driver not ready.
[ 2006.782257] iwlwifi 0000:02:00.0: Request scan called when driver not ready.
[ 2007.782403] iwlwifi 0000:02:00.0: Request scan called when driver not ready.
[ 2008.782587] iwlwifi 0000:02:00.0: Request scan called when driver not ready.
[ 2011.886354] iwlwifi 0000:02:00.0: Request scan called when driver not ready.
[ 2012.886778] iwlwifi 0000:02:00.0: Request scan called when driver not ready.
[ 2013.886974] iwlwifi 0000:02:00.0: Request scan called when driver not ready.
[ 2014.887176] iwlwifi 0000:02:00.0: Request scan called when driver not ready.
[ 2015.887199] iwlwifi 0000:02:00.0: Request scan called when driver not ready.
[ 2016.887399] iwlwifi 0000:02:00.0: Request scan called when driver not ready.
[ 2017.886934] iwlwifi 0000:02:00.0: Request scan called when driver not ready.
[ 2018.886904] iwlwifi 0000:02:00.0: Request scan called when driver not ready.
[ 2019.886604] iwlwifi 0000:02:00.0: Request scan called when driver not ready.
[ 2020.886154] iwlwifi 0000:02:00.0: Request scan called when driver not ready.
[ 2021.886147] iwlwifi 0000:02:00.0: Request scan called when driver not ready.
[ 2022.886573] iwlwifi 0000:02:00.0: Request scan called when driver not ready.
[ 2023.886595] iwlwifi 0000:02:00.0: Request scan called when driver not ready.
[ 2024.886780] iwlwifi 0000:02:00.0: Request scan called when driver not ready.
[ 2025.887091] iwlwifi 0000:02:00.0: Request scan called when driver not ready.
[ 2026.887209] iwlwifi 0000:02:00.0: Request scan called when driver not ready.
[ 2027.887462] iwlwifi 0000:02:00.0: Request scan called when driver not ready.
[ 2028.887640] iwlwifi 0000:02:00.0: Request scan called when driver not ready.
[ 2029.887279] iwlwifi 0000:02:00.0: Request scan called when driver not ready.
[ 2030.887490] iwlwifi 0000:02:00.0: Request scan called when driver not ready.
[ 2031.887938] iwlwifi 0000:02:00.0: Request scan called when driver not ready.
[ 2032.888433] iwlwifi 0000:02:00.0: Request scan called when driver not ready.
[ 2033.888571] iwlwifi 0000:02:00.0: Request scan called when driver not ready.
[ 2034.888618] iwlwifi 0000:02:00.0: Request scan called when driver not ready.
[ 2035.887793] iwlwifi 0000:02:00.0: Request scan called when driver not ready.
[ 2036.888056] iwlwifi 0000:02:00.0: Request scan called when driver not ready.
[ 2037.888423] iwlwifi 0000:02:00.0: Request scan called when driver not ready.
[ 2038.887917] iwlwifi 0000:02:00.0: Request scan called when driver not ready.
[ 2039.887555] iwlwifi 0000:02:00.0: Request scan called when driver not ready.
[ 2040.887878] iwlwifi 0000:02:00.0: Request scan called when driver not ready.
[ 2041.888281] iwlwifi 0000:02:00.0: Request scan called when driver not ready.
[ 2042.888636] iwlwifi 0000:02:00.0: Request scan called when driver not ready.
[ 2043.888912] iwlwifi 0000:02:00.0: Request scan called when driver not ready.
[ 2044.889483] iwlwifi 0000:02:00.0: Request scan called when driver not ready.
[ 2045.889966] iwlwifi 0000:02:00.0: Request scan called when driver not ready.
[ 2046.890252] iwlwifi 0000:02:00.0: Request scan called when driver not ready.
[ 2047.890645] iwlwifi 0000:02:00.0: Request scan called when driver not ready.
[ 2048.890250] iwlwifi 0000:02:00.0: Request scan called when driver not ready.
[ 2049.889997] iwlwifi 0000:02:00.0: Request scan called when driver not ready.
[ 2050.890310] iwlwifi 0000:02:00.0: Request scan called when driver not ready.
[ 2051.890543] iwlwifi 0000:02:00.0: Request scan called when driver not ready.
[ 2052.890717] iwlwifi 0000:02:00.0: Request scan called when driver not ready.
[ 2053.889916] iwlwifi 0000:02:00.0: Request scan called when driver not ready.
[ 2054.889085] iwlwifi 0000:02:00.0: Request scan called when driver not ready.
[ 2055.889021] iwlwifi 0000:02:00.0: Request scan called when driver not ready.
[ 2056.888637] iwlwifi 0000:02:00.0: Request scan called when driver not ready.
[ 2057.888174] iwlwifi 0000:02:00.0: Request scan called when driver not ready.
[ 2058.888025] iwlwifi 0000:02:00.0: Request scan called when driver not ready.
[ 2059.887964] iwlwifi 0000:02:00.0: Request scan called when driver not ready.
[ 2060.888342] iwlwifi 0000:02:00.0: Request scan called when driver not ready.
[ 2061.888491] iwlwifi 0000:02:00.0: Request scan called when driver not ready.
[ 2062.888862] iwlwifi 0000:02:00.0: Request scan called when driver not ready.
[ 2063.889233] iwlwifi 0000:02:00.0: Request scan called when driver not ready.
[ 2064.889558] iwlwifi 0000:02:00.0: Request scan called when driver not ready.
[ 2065.889708] iwlwifi 0000:02:00.0: Request scan called when driver not ready.
[ 2066.889912] iwlwifi 0000:02:00.0: Request scan called when driver not ready.
[ 2067.889778] iwlwifi 0000:02:00.0: Request scan called when driver not ready.
[ 2068.889991] iwlwifi 0000:02:00.0: Request scan called when driver not ready.
[ 2069.889769] iwlwifi 0000:02:00.0: Request scan called when driver not ready.
[ 2070.889553] iwlwifi 0000:02:00.0: Request scan called when driver not ready.
[ 2076.381628] iwlwifi 0000:02:00.0: Request scan called when driver not ready.
[ 2077.381854] iwlwifi 0000:02:00.0: Request scan called when driver not ready.
[ 2078.381147] iwlwifi 0000:02:00.0: Request scan called when driver not ready.
[ 2079.380350] iwlwifi 0000:02:00.0: Request scan called when driver not ready.
[ 2080.380556] iwlwifi 0000:02:00.0: Request scan called when driver not ready.
[ 2081.380737] iwlwifi 0000:02:00.0: Request scan called when driver not ready.
[ 4778.934626] psmouse serio1: Trackpad at isa0060/serio1/input0 lost sync at byte 1
[ 4778.936267] psmouse serio1: Trackpad at isa0060/serio1/input0 - driver resynced.
[ 4778.947333] psmouse serio1: Trackpad at isa0060/serio1/input0 lost sync at byte 1
[ 4778.949010] psmouse serio1: Trackpad at isa0060/serio1/input0 - driver resynced.
[ 4778.959552] psmouse serio1: Trackpad at isa0060/serio1/input0 lost sync at byte 1
[ 4778.961128] psmouse serio1: Trackpad at isa0060/serio1/input0 - driver resynced.
[ 4778.970657] psmouse serio1: Trackpad at isa0060/serio1/input0 lost sync at byte 1
[ 4778.973082] psmouse serio1: Trackpad at isa0060/serio1/input0 - driver resynced.
[ 4778.982429] psmouse serio1: Trackpad at isa0060/serio1/input0 lost sync at byte 1
[ 4778.984279] psmouse serio1: Trackpad at isa0060/serio1/input0 - driver resynced.
[ 4778.994219] psmouse serio1: Trackpad at isa0060/serio1/input0 lost sync at byte 1
[ 4778.996119] psmouse serio1: Trackpad at isa0060/serio1/input0 - driver resynced.
[ 5395.370784] psmouse serio1: Trackpad at isa0060/serio1/input0 lost sync at byte 1
[ 5395.372385] psmouse serio1: Trackpad at isa0060/serio1/input0 - driver resynced.
[ 5395.383867] psmouse serio1: Trackpad at isa0060/serio1/input0 lost sync at byte 1
[ 5395.385490] psmouse serio1: Trackpad at isa0060/serio1/input0 - driver resynced.
[ 5395.396903] psmouse serio1: Trackpad at isa0060/serio1/input0 lost sync at byte 1
[ 5395.398821] psmouse serio1: Trackpad at isa0060/serio1/input0 - driver resynced.
[ 5395.409984] psmouse serio1: Trackpad at isa0060/serio1/input0 lost sync at byte 1
[ 5395.412252] psmouse serio1: Trackpad at isa0060/serio1/input0 - driver resynced.
[ 5395.422770] psmouse serio1: Trackpad at isa0060/serio1/input0 lost sync at byte 1
[ 5395.423899] psmouse serio1: Trackpad at isa0060/serio1/input0 - driver resynced.
[ 5395.434744] psmouse serio1: Trackpad at isa0060/serio1/input0 lost sync at byte 1
[ 5395.436176] psmouse serio1: Trackpad at isa0060/serio1/input0 - driver resynced.
[ 5395.447032] psmouse serio1: Trackpad at isa0060/serio1/input0 lost sync at byte 1
[ 5395.448596] psmouse serio1: Trackpad at isa0060/serio1/input0 - driver resynced.
[ 5395.457766] psmouse serio1: Trackpad at isa0060/serio1/input0 lost sync at byte 1
[ 5395.459684] psmouse serio1: Trackpad at isa0060/serio1/input0 - driver resynced.
[ 5573.075208] dm9601 3-1:1.0 eth2: link up, 100Mbps, full-duplex, lpa 0xC5E1
[ 7458.953691] psmouse serio1: Trackpad at isa0060/serio1/input0 lost sync at byte 1
[ 7458.955412] psmouse serio1: Trackpad at isa0060/serio1/input0 - driver resynced.
[ 7458.966606] psmouse serio1: Trackpad at isa0060/serio1/input0 lost sync at byte 1
[ 7458.968288] psmouse serio1: Trackpad at isa0060/serio1/input0 - driver resynced.
[ 7458.979546] psmouse serio1: Trackpad at isa0060/serio1/input0 lost sync at byte 1
[ 7458.982250] psmouse serio1: Trackpad at isa0060/serio1/input0 - driver resynced.
[ 7458.992479] psmouse serio1: Trackpad at isa0060/serio1/input0 lost sync at byte 1
[ 7458.994591] psmouse serio1: Trackpad at isa0060/serio1/input0 - driver resynced.
[ 7459.002915] psmouse serio1: Trackpad at isa0060/serio1/input0 lost sync at byte 1
[ 7459.005011] psmouse serio1: Trackpad at isa0060/serio1/input0 - driver resynced.
[ 7459.014701] psmouse serio1: Trackpad at isa0060/serio1/input0 lost sync at byte 1
[ 7459.016465] psmouse serio1: Trackpad at isa0060/serio1/input0 - driver resynced.
[ 7459.026928] psmouse serio1: Trackpad at isa0060/serio1/input0 lost sync at byte 1
[ 7459.028188] psmouse serio1: Trackpad at isa0060/serio1/input0 - driver resynced.