Unsolved
This post is more than 5 years old
11 Posts
0
1492
support for Hyper-V 2012/VNX5300/iSCSI
Dear community,
Do we know when the eLAB will be updated as for support Hyper-V 2012 and iSCSI for our VNX platform?
Thanks in advance!
Unsolved
This post is more than 5 years old
11 Posts
0
1492
Dear community,
Do we know when the eLAB will be updated as for support Hyper-V 2012 and iSCSI for our VNX platform?
Thanks in advance!
Top
Tx1_f906d5
21 Posts
0
September 19th, 2012 06:00
Mike, something similar came up earlier on a different thread. Here's a cat and paste ....
The short answer is that the list of supported configurations and layered EMC S/W will be provided in two places:
1) ELab Navigator (as it is refreshed); and
2) The Microsoft Windows Catalog as new configurations are validated and posted ... Here's a quick link to the EMC w/ Windows 2012 certification list ... http://www.windowsservercatalog.com/results.aspx?&text=EMC&chtext=&cstext=&csttext=&chbtext=&bCatID=1282&cpID=0&avc=38&ava=0&avq=0&OR=5&PGS=25&ready=0
You ask about Hyper-V 2012, but in reality this is Windows Server 2012 - unless you are specifically asking about Hyper-V Server 2012 (the bare-metal install) ... which is still a variant of Windows Server 2012.
In the list provided by the link in item (2) above, you will find a number of VNX platforms with iSCSI target support .. please check all pages. It's possible that your specific VNX system is already certified.