Unsolved
This post is more than 5 years old
4 Posts
0
6789
3007WFP-HC sync polarity
according to the specs on this page
<ADMIN NOTE: Broken link has been removed from this post by Dell>
this monitor has a -/+ sync polarity at 2560x1600. i have two other 30" LCDs that have a +/- sync polarity and need them all to be the same. if i create a custom resolution for the 3007 with a +/- sync polarity could that potentiallty permanently damage the monitor?
DELL-Chris M
Community Manager
Community Manager
•
54.3K Posts
0
April 21st, 2011 15:00
fadetoblack,
From engineering -
The polarities are listed for the graphics adapter. With these polarities along with H and V frequencies, it knows exactly which resolution to produce and the display should work perfectly for that resolution. Toggling the polarity to opposite polarity will change the resolution/ timings and may not produce the perfect picture. No harm will be done to the display but I would strongly advise to use correct polarity.
fadetoblack
4 Posts
0
April 22nd, 2011 18:00
thanks for the response Chris, that's exactly what i wanted to know.