Unsolved
This post is more than 5 years old
3 Posts
0
37074
December 7th, 2015 15:00
U2414 Monitor Connections
I am trying to set up 2 u2414 monitors to my video card Quadro K620 and its not working. My monitors say no Display Port using power save mode. I have a DP coming from 1 monitor and then connecting the end of that with the mini dp to the DP on the video card. The other monitor I have running an HDMI cable from the monitor to a HDMI to DVI port on my video card. Again its saying nothing is connected. Any ideas what I am doing wrong?
Thanks,
Brittany
No Events found!
DELL-Chris M
Community Manager
•
56.9K Posts
•
232.1K Points
0
December 7th, 2015 16:00
DP (DisplayPort)
mDP (Mini-DisplayPort)
* Turn the computer and both U2414H off
* Disconnect both U2414H and all monitor cabling from the computer
* Connect only U2414H (let's call it #1 U2414H) to the computer
Computer Quadro K620 mDP out --> Dell mDP to DP cable --> #1 U2414H #3 DP in
(#3 = DP in, #4 = mDP in, #5 = DP out)
* Turn #1 U2414H on, then the computer
What appears on screen?
Brittany Schama
3 Posts
0
December 7th, 2015 18:00
Chris M- your suggestion did work however only for 1 computer. The second monitor is being connected using an hdmi from the display to a DVI port on the video card. The 2nd monitor shows "no display port'...any suggestion on how to get this 2nd monitor up?
Brittany Schama
3 Posts
0
December 7th, 2015 18:00
Chris- so that worked thank you! But that only worked for setting up 1 monitor. I have a DVI connection on my video card and I have a hdmi cable running from the 2nd monitor to the DVI port but it's not connecting. Does this connection work? Any other suggestion on how to connect the 2ND monitor?
DELL-Chris M
Community Manager
•
56.9K Posts
•
232.1K Points
0
December 8th, 2015 05:00
Show me a link to the specific cable you are using. List every port on the video card. The second monitor Input Select should be set to HDMI 1 or 2.