Unsolved
7 Posts
0
1844
802.1x N1100
Hi,
First of all I want to apologize if this is not the right forum for asking, mods please feel free to move the thread.
I am new to Dell networking as a matter of fact this is my first time I log into Dell switches, so I am a little bit confused. Anyhow, I am doing a PoC for 802.1x for this company and I was looking for white paper for Dell N1100 switch series, but I couldn't find anything.
If anyone could put me into right direction or share some manuals with me, I would greatly appreciate it.
walwar
remy-ch
26 Posts
1
November 12th, 2019 08:00
Do you read this post ? https://www.dell.com/community/Networking-General/Networking-resources/m-p/5882170/highlight/true#M33668
walwar
7 Posts
0
November 21st, 2019 05:00
Sorry for the late reply and thank you for the link! I will check them and hopefully I find what I am looking for.
walwar
7 Posts
0
November 28th, 2019 23:00
Hello,
I have read through the documentation and followed the the instructions but still not able to get this to work. This is my configuration, am I missing something? Any input is greatly appreciated!
aaa new-model
aaa authentication dot1x default radius
authentication enable
dot1x system-auth-control
aaa authentication dot1x default radius
aaa authorization network default radius
aaa server radius dynamic-author
radius server attribute 8 include-in-access-req
radius server attribute 31 mac format ietf lower-case
radius server auth 192.168.1.213
client 192.168.1.213 server-key
primary
name "NPS"
usage all/authmgr (tried with both)
Uplink:
interface Gi1/0/1
switchport mode trunk
switchport trunk allowed vlan 4
authentication port-control force-authorized
Client PC:
interface Gi1/0/2
spanning-tree portfast
switchport mode general
authentication host-mode multi-auth
authentication priority dot1x mab
exit
EDIT: I am using N1148T-ON switch with the latest firmware 6.6.0.10, if that helps.
user_0ced04
1 Message
0
February 10th, 2020 23:00