Unsolved
2 Posts
0
1895
CPU Mgmt Port Hight Utilization and Excessive Traffic
Hello,
I see this error on 3 out of 7 of my switches, after which the switch reboots itself. I had SolarWinds management software installed on a server and monitoring the switches through the management port. I thought the issue might be with solarwinds putting excessive traffic on the management port. I have disconnected the management port but am stull getting this error alongside cpu errors. What do you guys think?
switch-a#show logging
Jan 4 09:58:21: %S3148:1 %KERN-6-INT: CP Mgmt port receiving excessive traffic; will be rate controlled
%STKUNIT1-M:CP %SYSADM-5-CPU_THRESHOLD: Overall cpu usage of management-unit is above threshold. Cpu1minUsage (98%)
Jan 4 10:58:29: %STKUNIT1-M:CP %SYSADM-5-TASK_CPU_THRESHOLD: 1min cpu utilization of management-unit has exceeded the threshold. Top three processes are sshd (80.09%), system (17.89%), sysdlp (1.03%)
switch-a#show processes cpu management-unit 5
CPU utilization for five seconds: 18%/0%; one minute: 17%; five minutes: 18%
PID Runtime(ms) Invoked uSecs 5Sec 1Min 5Min TTY Process
0x00000000 5455700 545570 10000 16.77% 17.96% 18.50% 0 system
0x0000017f 318840 31884 10000 2.17% 0.97% 0.95% 0 sysdlp
0x0000017c 169010 16901 10000 0.79% 0.58% 0.55% 0 sysd
0x0000024d 28740 2874 10000 0.20% 0.13% 0.09% 0 xstp
0x000000a2 7300 730 10000 0.20% 0.07% 0.02% 0 ofmgr
switch-a#show logging audit
Jan 4 09:52:46: switch-a: %CLI-6-Chassis has undergone an uncontrolled shutdown previously
Jan 4 10:14:56: switch-a: %CLI-6-logging extended by default from console
Jan 4 10:15:00: switch-a: %CLI-6-exit by default from console
Jan 4 10:16:31: switch-a: %CLI-6-copy running-config startup-config by default from console
DELL-Josh Cr
Moderator
Moderator
•
8.5K Posts
0
January 7th, 2019 09:00
Hi,
Which switches are you using? Is the firmware up to date?