Unsolved
This post is more than 5 years old
1 Message
0
10773
Channel bonding and WCCP
Can you confirm if the Dell PowerConnect 5524 supports WCCP?
Also when the PowerConnect 5524 is configred as a stack (core switch) can you connect two uplink 802.1Q links from each DELL access switch one uplink to each of the two stack members and using channel bonding have the full bandwidth available of both uplink ports?
So from each access switch you would configure channel bonding to one interface on each of the individual core stack members. Is this possible?
jp1110
67 Posts
0
October 15th, 2011 02:00
If I understand you correctly, the switches are "stacked" - you have a single managment point for both switches. From that your question is can you create an aggretagate pair (uplink), one link from each switch... Answer. you should be able to.
"So from each access switch you would configure channel bonding to one interface on each of the individual core stack members. Is this possible?"
It does sound like your asking how to do this but if so some questions will need to be asked. For example, the mention of a core. Does your core manage multiple VLANs, do you have ACLs, anything specific that would have to be considered for your aggregate...