11 Posts
0
1041
Dell EMC S5232F-ON BOOT PROBLEM
I set up the switch and cannot login using the same login credentials. I tried to factory reset it but since then i have the when the switch boots up as shown below. I will appreciate your assistance and even more explanation on this issue.
Version 2.19.1266. Copyright (C) 2020 American Megatrends, Inc.
BIOS Date: 09/10/2020 03:23:00 Ver: 0ACHI040
Press or to enter setup.AD, Welcome to GRUB!
GNU GRUB version 2.02
+----------------------------------------------------------------------------+
|*ONIE: Install OS |
| ONIE: Rescue |
| ONIE: Uninstall OS |
| ONIE: Update ONIE |
| ONIE: Embed ONIE |
| EDA-DIAG |
| |
| |
| |
| |
| |
| |
+----------------------------------------------------------------------------+
Use the ^ and v keys to select which entry is highlighted.
Press enter to boot the selected OS, `e' to edit the commands
before booting or `c' for a command-line.
The highlighted entry will be executed automatically in 0s.
Booting `ONIE: Install OS'
ONIE: OS Install Mode ...
Platform : x86_64-dellemc_s5200_c3538-r0
Version : 3.40.1.1-7
Build Date: 2020-03-24T20:44-07:00
AF,
DXE_EXIT_BOOT_SERVICES(03101019)
B, B, Info: Mounting kernel filesystems... done.
Info: Mounting ONIE-BOOT on /mnt/onie-boot ...
ERROR: fsck corrected errors.
Info: Mounting EFI System on /boot/efi ...
Info: BIOS mode: UEFI
Info: Making NOS install boot mode persistent.
Info: Using eth0 MAC address: 74:86:e2:b5:a3:20
Info: eth0: Checking link... down.
ONIE: eth0: link down. Skipping configuration.
ONIE: Failed to configure eth0 interface
Starting: klogd... done.
Starting: dropbear ssh daemon... done.
Starting: telnetd... done.
discover: installer mode detected. Running installer.
Starting: discover... done.
Please press Enter to activate this console. Info: eth0: Checking link...
To check the install status inspect /var/log/onie.log.
Try this: tail -f /var/log/onie.log
FYI: This is a truncated output
DELL-Joey C
Moderator
Moderator
•
3.1K Posts
1
October 6th, 2022 00:00
Hi @haryortheyji,
The username and password to the EDA-diag is root and calvin.
DELL-Erman O
Moderator
Moderator
•
2.2K Posts
0
September 22nd, 2022 00:00
Hello, thanks for sharing the output. Could you try to password recovery on pg 822 and factory defaults pg 823 here https://dell.to/3xES5Pi
or to factory default configuration on pg 22 https://dell.to/3faRE99
Hope that helps!
haryortheyji
11 Posts
0
October 5th, 2022 12:00
Hi Ermano,
The device does not boot up to the user prompt so I can't do any of the options you suggested.
Info: Attempting file://dev/mmcblk0p1/onie-installer-x86_64-bcm ...
Info: Attempting file://dev/mmcblk0p1/onie-installer-x86_64-bcm.bin ...
Info: Attempting file://dev/mmcblk0p1/onie-installer-x86_64 ...
Info: Attempting file://dev/mmcblk0p1/onie-installer-x86_64.bin ...
Info: Attempting file://dev/mmcblk0p1/onie-installer ...
Info: Attempting file://dev/mmcblk0p1/onie-installer.bin ...
Info: Attempting tftp://onie-server/74-86-E2-B5-A3-20/onie-installer-x86_64-dellemc_s5232f_c3538-r0 ...
Info: Attempting tftp://onie-server/onie-installer-x86_64-dellemc_s5232f_c3538-r0 ...
Info: Attempting tftp://onie-server/onie-installer-x86_64-dellemc_s5232f_c3538-r0.bin ...
Info: Attempting tftp://onie-server/onie-installer-x86_64-dellemc_s5232f_c3538 ...
Info: Attempting tftp://onie-server/onie-installer-x86_64-dellemc_s5232f_c3538.bin ...
Info: Attempting tftp://onie-server/onie-installer-dellemc_s5232f_c3538 ...
Info: Attempting tftp://onie-server/onie-installer-dellemc_s5232f_c3538.bin ...
Info: Attempting tftp://onie-server/onie-installer-x86_64-bcm ...
Info: Attempting tftp://onie-server/onie-installer-x86_64-bcm.bin ...
Info: Attempting tftp://onie-server/onie-installer-x86_64 ...
Info: Attempting tftp://onie-server/onie-installer-x86_64.bin ...
Info: Attempting tftp://onie-server/onie-installer ...
Info: Attempting tftp://onie-server/onie-installer.bin ...
Info: Sleeping for 20 seconds
That is what happened during the boot process.
DELL-Chris H
Moderator
Moderator
•
8.4K Posts
0
October 5th, 2022 13:00
Haryortheyji,
Based on your description it would appear that the OS was corrupted or deleted, but to start I would suggest you try running the EDA-diag from the menu, as it looks like from your earlier post you have grub working. If that doesn't help I would then recommend that you try reinstalling the OS.
Let me know if this helps and what you see.
haryortheyji
11 Posts
0
October 5th, 2022 14:00
Thanks. Am not sure if the OS was either deleted or corrupted. but I tried the EDA-diag.
dellemc-diag-os login:
At the prompt I tried Linuxadmin as username and passwd but that didn't work. Also, admin and admin did not work.