Unsolved
29 Posts
0
3944
Dell S4048-ON 100% CPU usage, Proccess KP and ifagt_1
Hi
I have 2 x Dell S4048-ON in VLT configuration. FTOS version 9.14(1.3)
And suddenly on one of my dell i sow very high latency to management interface. That dell have 100% CPU usage.
The process that cause 100% CPU are KP and ifagt_1
CPU utilization of sysdlp for five seconds: 80%/22%; one minute: 92%; five minutes: 92%
PID Runtime(ms) Invoked uSecs 5Sec 1Min 5Min TTY Process
0xb00b5020 609110 60911 10000 78.35% 72.57% 69.23% 0 KP
0xaff7b020 278100 27810 10000 0.84% 19.15% 23.12% 0 ifagt_1
CPU utilization of sysdlp for five seconds: 95%/39%; one minute: 87%; five minutes: 90%
PID Runtime(ms) Invoked uSecs 5Sec 1Min 5Min TTY Process
0xaff7b020 373370 37337 10000 71.14% 22.46% 18.52% 0 ifagt_1
0xb00b5020 958080 95808 10000 24.05% 64.44% 71.54% 0 KP
Anyone have idea what that processes do ? And what may be a problem.
That situation occurs 1 hour after last configuration change.
On that switch i don't have any layer 3 config (except management interface) . Only VLT + VLANs + Port channels.
Restart that switch doesn't solve the problem
DELL-Josh Cr
Moderator
Moderator
•
8.5K Posts
0
May 20th, 2019 14:00
Hi,
What was the configuration change?
dev246
29 Posts
0
May 21st, 2019 00:00
Adding new port channel (in total i have 6 port channel no switch is almost empty).
Funny thing that yesterday i had no idea what cause problem so i unplug links to recently added switch (for that switch i create that last port channel), unplug SFP transceiver (not SFP+) for that switch, and problem was solved. CPU back to normal. So I thought something was with this new switch, but I decide to connect that switch again (this same sfp transceivers, this same ports, no configuration change) and the problem did not come back.
Any idea what happen? And what for is process KP and ifagt_1 ????
DELL-Josh Cr
Moderator
Moderator
•
8.5K Posts
0
May 21st, 2019 09:00
They are related to interface management, it sounds like it may have gotten stuck adding the new module.
dev246
29 Posts
0
May 22nd, 2019 00:00
dev246
29 Posts
0
May 23rd, 2019 03:00
Hello
I have identified what causes the problem but I do not know why.
I have several SFP transceivers OPTON 125g-SM-DF31-LC-D, I known that is not in compatibility list and dell it does not guarantee that they will work with their switch. But single Transceiver work fine, even several transceiver works fine but when i use two specific transceivers on in one switch CPU goes to 100%, when i use each separately everything ok. If I use this specific two transceiver in two different switches everything is ok.
So i can reproduce problem on demand, so even the are not dell transceivers maybe you will want to take a look at this because the problem is quite strange
DELL-Josh Cr
Moderator
Moderator
•
8.5K Posts
0
May 23rd, 2019 07:00
Can you private message me the service tag and an email address to contact you?