S4810 Firmware

Hi, thanks for choosing Dell. The OS 8 is too outdated, I'm afraid. (OS 9 is okay) Please see the link below. https://dell.to/3N1Lnsb

So are you saying it is not possible for me to upgrade to OS9?

Hi, Unfortunately, I can't find older versions as well. I don't have reach to force10 websites if you have you can check there for archive OS8 versions. I'm not sure Dell Digital Locker has Force10 OS8 versions but also you can look there. 
I couldn't find for S4810 but there are some S series Force10 OS8 Software https://dell.to/3wVqKXW

How to Install Dell Networking FTOS on Dell Open Networking (ON) Switches https://dell.to/3t8GPIH

From what I've been able to tell, any force10 website link redirects to the same Dell page.

Hello Diver_1845,

I picked up your post. Young is currently out of office.

I'm still in progress trying to find 8.3.12.0.  I'll also update Young.

We will follow up when we have more information.

Charles R,

Thanks for your help.

Hi Charles got you this. Hope this helps. https://dell.to/3NdUiHl

Login credentials:  

User = NAmmEGE9E9
User Password = 6IwJJ622JG

Hello DELL-Young E and Dell -Charles R

I am facing the same problem! I was also unable to find the OS8 firmware (8.3.10.2). I accessed the link provided, but the username and password are not valid anymore. Please, can you give me another credential to access the system to download the firmware?

@Dell-y

Thank you.

Hello shyfimacks,

I will have to look into this an update you.

Hello,

I too am looking for this firmware (Dell Network OS 8.3.12.0) to I can upgrade to the latest OS9 for my Dell Force10 S4810P switch.

Has there been any luck locating the firmware?

Thank you

Hello, unfortunately I also couldn't find OS 8.3.12.0 and I encountered it because at the end of the support no firmware was available. I couldn't access that link on thread either because it has expired. I asked a co-worker if they have a firmware file but still waiting for the answer.(their out of shift) If any chance to get it I'll share it with you.

okay, I got the below new links from my co-worker, but I have to remind you this is your own risk to install it because there is no support or otherwise.

HTTPS access at:

   https://ftp.emc.com/action/login?domain=ftp.emc.com

FTP Temp User = NADmAVm1Fy

FTP Temp User Password = 8AMwBZBwMA

I run the PS2-1 R&D network for Dell.  I've got a copy of FTOS-SE-8.3.12.2.bin for the original S4810 & S4820T, from the original Force10 website.  I confirm that it works with the old FTOS 8 OS, but also requires the u-boot update in order to function, post OS update.  I can confirm that these operating systems install and function, although my attempts at performing the update to FTOS 9.x.x.x have so far been unsuccessful.  I know that I've done this upgrade in the past, (all the way to FTOS 9.14.1.12 but unfortunately falling short on the otherwise, usual good memory.....

Is there a location to download the u-boot update?

Hello jstu83,

We'll have to research this and update you.

As mentioned this OS is out of support so I'm not sure how much more we can find.

Maybe @singerof FTOS  might have it and can help out.