Unsolved
This post is more than 5 years old
13 Posts
0
12343
Shutdown VLAN on Force10 S50N
I noticed that FTOS gives allows you to issue "no shutdown" on vlans. However, when I "shutdown" a vlan, it still passes traffic. How can I temporarily disable a vlan so it does not pass traffic?
FTOS v8.4.2.7
DELL-Josh Cr
Moderator
Moderator
•
8.5K Posts
0
October 16th, 2015 11:00
Are you wanting to shut down traffic within the switch or between switches? You could create an ACL that would block traffic to that VLAN page 205 You could also try removing that VLAN from trunk ports. Beyond that you would have to remove it from all interfaces in order to fully remove the VLAN.