This post is more than 5 years old
9 Posts
0
15108
show running-config not working - Powerconnect 2824
We have a few old PC2824s, and for some reason the "show running-config" command is returning "Unrecognized command" on them. We have a POE that's in the same series, and the command works fine on it. I'm in privileged exec mode in all cases, and using a user with full permissions (level 15). I can run other exec mode commands like show tech-support. Any ideas why this might not work on some switches?
Thanks!
Anonymous
5 Practitioner
5 Practitioner
•
274.2K Posts
0
May 17th, 2017 11:00
I do not see the show run option on the 2800 switch.
PC2824# sh run
% Unrecognized command
PC2824# show ?
ip IP information
tech-support Show system information
I do not see show run listed in the user guide either.
Anonymous
5 Practitioner
5 Practitioner
•
274.2K Posts
0
May 17th, 2017 08:00
Try using the show tech command. It will provide you with the current config and more.
cawst
9 Posts
0
May 17th, 2017 09:00
Sorry, to clarify - my bigger concern is whether there's something wrong with the switch, the config, etc... that this command doesn't work when it seems like it should from everything I read.
cawst
9 Posts
0
May 17th, 2017 14:00
Interesting...I was told elsewhere it should be there. Relieved if it shouldn't be - means there's nothing wrong. :-) Okay, thanks!