Unsolved
This post is more than 5 years old
5 Posts
0
10668
whats missing from my config?
I seem to be missing a route I think, still new to this.
Switch 1> vlan1 IP 100.100.100.2
Switch 2> vlan1 IP 100.100.100.3 vlan2 192.168.10.1
Switch3> vlan1 IP 100.100.100.4 vlan2 192.168.11.1
Switch1 Optic port 1 -- Switch 2 optic port 1 Switch 2 optic port 2 -- switch 3 optic port 1
All optic ports are on vlan1 on each switch. They can all ping each other.
I have a DHCP server in switch 1 that can has active scopes for each subnet. However i can't seem to get them working right. If I change the gateway on the server from 100.2 to .3 or .4 it'll make the respective switch start working for dhcp.
The idea is for 100.2 to the gateway for everything. the internet router will be plugged direct into this switch. What am I missing?
BumSkull
5 Posts
1
October 7th, 2015 09:00
In case this helps anyone else i got it fixed!
I had the wrong gateway on the route to the 2 subnets. they were listed as vlan1 but i needed to put the ip assigned to vlan1 on each switch. IE.. ip route 192.168.10.0 255.255.255.0 100.100.100.3