Skip to main content
Start a Conversation

Unsolved

This post is more than 5 years old

curtr

1 Message

5151

February 5th, 2004 17:00

Actiontec DSL gateway connection

I have a Dell Truemobile 1150 client and I am trying to connect to an Actiontec 1524 DSL gateway. The client manager shows the signal strength as excellent. I have set the network name to be the same as the gateway and security is disabled but I am unable to see anything in the truemobile site monitor. When I edit my truemobile wireless configuration and press the scan button a blank list is displayed. The Actiontec support  people say the gateway is configured properly and that the problem must be with the truemobile client but as far as I can tell everything is ok on that side also.

PolarOrbit

14 Posts

February 6th, 2004 06:00

I'm not familiar with your equipment but you can try setting the gateway to broadcast the SSID. Also, if your equipment is multi-protocol (i.e. a/b/g) try locking it into one protocol. Once you establish a connection you can put everything back one at a time.

Was this post helpful?

View All

Top