Highlighted
Not applicable

My network adapter will not start! (Broadcom Code 10)

Jump to solution

Hiya everyone,

Turns out that my Dell XPS M1530 laptop got a virus, so to solve this I re-installed Windows (Vista Home Premium) and as a result, all of my files, drivers and software have all been deleted. I have re-installed almost everything I need, except one vital thing. The Wireless Network Adapter. 

I have used all the network drivers on my Dell Driver disc and none of them have seemed to work, luckily I have a spare computer so I can ask you all this and I have looked all over the internet for driver download, none of them have worked. I looked around and it seems to be quite a common problem when people advance OS' and I suppose I have been in the same situation, But no drivers seem to work!

Does anyone have any advice or download links to help me then that would be great. Thanks

Extra Information: Brodcom 802.11n Network Adapter

Device Status: This device cannot start (Code 10)

Service: BCM43X

0 Kudos
1 Solution

Accepted Solutions
Highlighted
Not applicable

Re: My network adapter will not start! (Broadcom Code 10)

Jump to solution

SOLVED:

I have an Inspiron 1720 with the same problem after reinstalling Vista Home Premium....code 10...wireless adapter cannot start.

Device Manager showed "Broadcom 802.11n Network Adapter"

Driver Details showed a Microsoft Driver with an older date. I believe the version was 4.82.28.56

PROBLEM: This is not the correct driver!!! You need a Dell driver ... not a MS driver! The default MS driver was installed.

I found a folder with the correct driver at C:\drivers\network\R151522 on my hard drive.

I used the Device Manager "Update Driver" option and pointed to that folder....success!

Device Manager now shows "Dell Wireless 1505 Draft 802.11n WLAN Mini-Card" under Network Adapters. I can see my wireless networks again!

Note: The folder may have been created while I was using the "Utilities" CD during my recovery.

 

Good Luck to all

 

View solution in original post

21 Replies
Highlighted
7 Gold

Re: My network adapter will not start! (Broadcom Code 10)

Jump to solution
0 Kudos
Not applicable

Re: My network adapter will not start! (Broadcom Code 10)

Jump to solution

Thanks for the link, however the only driver that I think is the right one keeps saying "The operating system is not supported. The software will not be installed."

So I seem to have a problem.

0 Kudos
Highlighted
2 Bronze

Re: My network adapter will not start! (Broadcom Code 10)

Jump to solution
Hi Triforcehunter, did you find a solution to this? I have this exact issue after a clean install (Vista 64-bit). There doesn't appear to be a driver on Broadcom's or Dell's website.
0 Kudos
Highlighted
8 Krypton

Re: My network adapter will not start! (Broadcom Code 10)

Jump to solution

 ukAdamR,

 

Try running Finding System Information. At the bottom you'll see your network adapters. Post the network adapters here along with the make and model of your computer and operating system.

 

 

Rick 


#DellRockstar

Welcome to Dell Community!

#DellWorld 2012
#DellWorld 2015
#Dell EMC World 2016

#MicrosoftMVP - Windows Expert-Consumer April 1, 2012 to March 31, 2015

This is a Dell User Forum. I am a Dell user, just like you are.
0 Kudos
Highlighted
Not applicable

Re: My network adapter will not start! (Broadcom Code 10)

Jump to solution

Hello, I'm having the same problem. (Code 10 - cannot start) on a Broadcom NetXtreme Gigabit Ethernet Controller, BCM5761E. I've tried the drivers from the Broadcom site (b57nd60a) and from Dell.com (file R239885.exe), same result, cannot start. I'm on a Dell Precision M6400 Laptop running Windows Vista 64. I haven't reinstalled Windows, it used to work fine, I don't know what happened.

Here is the device instance path: PCI\VEN_14E4&DEV_1680&SUBSYS_168014E4&REV_10\4&15B2C2F&0&00E5

The problem is intermittent, sometimes it works, most of the time it doesn't. I'm currently using wireless to access the internet. I communicated briefly with Broadcom support, but they stopped responding to me. They told me to run the diagnostic tool you can download from the bottom of this page:

http://www.broadcom.com/support/ethernet_nic/netxtreme_desktop.php

Here is the result that I got:

----

Error detected at device 0 (PCI slot 09:00:00)
Revision: 14.13
Unit under test: NIC
Module: IRQ Test
Test Name: IRQ Check
Error #18
Cannot gain access to flash, SwArbit: 3100
Msg: Failed reading NVRAM at 0x0000
----

I sent this result to them, and got no reply. I'd appreciate any help that anyone here can provide.
Highlighted
8 Krypton

Re: My network adapter will not start! (Broadcom Code 10)

Jump to solution

 marklm2,

 

Did you try using these drivers?

 

Broadcom BCM5784M LAN or better known as Broadcom Netlink Gigibit Ethernet (64-bit drivers)

 

 

Rick


#DellRockstar

Welcome to Dell Community!

#DellWorld 2012
#DellWorld 2015
#Dell EMC World 2016

#MicrosoftMVP - Windows Expert-Consumer April 1, 2012 to March 31, 2015

This is a Dell User Forum. I am a Dell user, just like you are.
0 Kudos
Highlighted
Not applicable

Re: My network adapter will not start! (Broadcom Code 10)

Jump to solution

I just tried installing those drivers, and I'm getting the same result. My guess is that this might not be a driver issue.

0 Kudos
Highlighted
8 Krypton

Re: My network adapter will not start! (Broadcom Code 10)

Jump to solution

 marklm2,

 

Reinstall the operating system recently?

 

Try system restore and go back to when this worked?

 

Restart the computer and Press F2 on startup. Look and make sure everthing looks correct in the bios.

 

Start, control panel, device manager, network, right click on the adapter and make sure it's enabled there. If so, then try deleting it, then restart your computer. Windows should install it and correct the issue if there was a problem. Make a system restore point first in case this doesn't work.

 

 

Rick


#DellRockstar

Welcome to Dell Community!

#DellWorld 2012
#DellWorld 2015
#Dell EMC World 2016

#MicrosoftMVP - Windows Expert-Consumer April 1, 2012 to March 31, 2015

This is a Dell User Forum. I am a Dell user, just like you are.
0 Kudos
Highlighted
Not applicable

Re: My network adapter will not start! (Broadcom Code 10)

Jump to solution

SOLVED:

I have an Inspiron 1720 with the same problem after reinstalling Vista Home Premium....code 10...wireless adapter cannot start.

Device Manager showed "Broadcom 802.11n Network Adapter"

Driver Details showed a Microsoft Driver with an older date. I believe the version was 4.82.28.56

PROBLEM: This is not the correct driver!!! You need a Dell driver ... not a MS driver! The default MS driver was installed.

I found a folder with the correct driver at C:\drivers\network\R151522 on my hard drive.

I used the Device Manager "Update Driver" option and pointed to that folder....success!

Device Manager now shows "Dell Wireless 1505 Draft 802.11n WLAN Mini-Card" under Network Adapters. I can see my wireless networks again!

Note: The folder may have been created while I was using the "Utilities" CD during my recovery.

 

Good Luck to all

 

View solution in original post