you see the message that windows cannot configure the wireless connection because the card utility is managing your wireless n/w. you can try and use the utility to configure your connection. depending on the card manufacturer you would either have Dell Wireless WLAN card utility (for Dell w/l cards) or Intel Proset/Wireless utility (for Intel cards). you should be able to find one of these in the Start--> All Programs menu. if you would like to have Windows as your wireless manager then follow the steps below.
1) click Start --> Run
2) type services.msc and click OK
3) in the services window scroll down to find Wireless Zero Configuration and open it up
4) if the service status says Stopped then click Start and also ensure that the Startup type is Automatic.
now windows is your wireless manager and you will also be able to see the wireless networks tab
oh i assumed u have a Dell or Intel wireless card. with a Linksys wireless card you would probably have their own utility. so wireless zero configuration service is started...hmm.....right-click on the wireless connection icon in the system tray (next to the time display) and click Open Network Connections. right-click on Wireless Network Connection and click Properties. if wireless zero configuration is functioning properly then you should see the wireless networks tab. on that screen do you see 'use windows to configure my wireless network settings'? make sure that it is checked and then search for networks
I looked in the Start--> All Programs menu and do not have either "Dell Wireless WLAN card utility (for Dell w/l cards) or Intel Proset/Wireless utility (for Intel cards) listed."
Per your described steps, I went into "Wireless Zero Configuration" and service status was Start and the Startup type is Automatic. I did some searching and found that for XP users it is highly recommended to use the Intel utility and not the
Dell utility. I can unplug and plug in the Linksys wireless card and windows responds with the message "Wireless Networks Detected", but when I click on it to "View Wireless in Range", I get the "Windows cannot configure this wireless connection".
I guess that's what is driving me crazy. Nowhere can I find a checkbox that states: 'use windows to configure my wireless network settings'. I know once I find out what is missing or not configured properly, the answer will be easy. The fact that the pc knows there is a wireless network avalilable tells me I'm only a stones throw away from the answer, but I cannot find what direction the stone needs to be thrown ;-)
Because I'm not "hands-on" at your computer, this might be a little difficult...
I would suggest disabling/removing your Wireless PCI card and its' drivers (for some reason, I previously thought you had a laptop)... until you can establish a connection with the wired (RJ-45 plug) Ethernet adapter.
Click "Start" Click "Run" Type: cmd At the command prompt, type: IPconfig /all "Copy" & "Paste" the results to your next post in this thread.
Is this a "Clean Install" of WinXP SP2? Are there any error messages or Unknown Devices in "Device Manager" (if so, post the message)? Also, post the model of your "Wireless PCI adapter" and "Router"... plus the firewall you're using (i.e. - Windows Firewall, McAfee security suite, etc.).
muggymach3
73 Posts
0
October 7th, 2006 01:00
hello zyman,
you see the message that windows cannot configure the wireless connection because the card utility is managing your wireless n/w. you can try and use the utility to configure your connection. depending on the card manufacturer you would either have Dell Wireless WLAN card utility (for Dell w/l cards) or Intel Proset/Wireless utility (for Intel cards). you should be able to find one of these in the Start--> All Programs menu. if you would like to have Windows as your wireless manager then follow the steps below.
1) click Start --> Run
2) type services.msc and click OK
3) in the services window scroll down to find Wireless Zero Configuration and open it up
4) if the service status says Stopped then click Start and also ensure that the Startup type is Automatic.
now windows is your wireless manager and you will also be able to see the wireless networks tab
muggymach3
73 Posts
0
October 7th, 2006 03:00
Zyman
5 Posts
0
October 7th, 2006 03:00
Zyman
5 Posts
0
October 7th, 2006 13:00
Akule50
385 Posts
0
October 7th, 2006 18:00
Have you updated your drivers with the latest from the Linksys website?
See if steps 1-7 in the guide here ("click here") might help. If not, maybe you might want to post the model of your Wireless PCMCIA card & Router...
Aloha,
Rod
Zyman
5 Posts
0
October 7th, 2006 19:00
Akule50
385 Posts
0
October 9th, 2006 21:00
Because I'm not "hands-on" at your computer, this might be a little difficult...
I would suggest disabling/removing your Wireless PCI card and its' drivers (for some reason, I previously thought you had a laptop)... until you can establish a connection with the wired (RJ-45 plug) Ethernet adapter.
Click "Start"
Click "Run"
Type: cmd
At the command prompt, type: IPconfig /all
"Copy" & "Paste" the results to your next post in this thread.
Is this a "Clean Install" of WinXP SP2? Are there any error messages or Unknown Devices in "Device Manager" (if so, post the message)? Also, post the model of your "Wireless PCI adapter" and "Router"... plus the firewall you're using (i.e. - Windows Firewall, McAfee security suite, etc.).
Aloha,
Rod
Message Edited by Akule50 on 10-09-2006 01:15 PM
Zyman
5 Posts
0
October 10th, 2006 00:00