What operating system are you running? Are you using Enternet300, WinPoet or some other software for the connection? What modem are you using? How long have you been using SBC DSL? Sorry about the questions, more info is needed.
Disgustingly similar to a problem I have. I try to switch from one URL (site) to another. Either the software lunches out or I get a 'you loose' message. Then I back up, retry, and more often than not I'm successful.
micmaxe
740 Posts
0
September 21st, 2003 10:00
BoAFan116
4 Posts
0
September 21st, 2003 15:00
micmaxe
740 Posts
0
September 22nd, 2003 00:00
Open control panel
Open Network
Look for the first entry in the scroll box
marked TCP/IP, that is associated with a hardware ethernet card (ignore dialup, especially Enternet or NTS and VPN type bindings).
(If you have a 4060 USB modem, select "TCP/IP-> Efficient Networks SpeedStream 4060 CIP/1483")
Select it and press properties
Select IP address from the tab
Is Obtain IP address automatically checked?
If so, change that to Specify an IP address and enter 192.168.1.10, and
255.255.255.0, into IP address and subnet mask fields respectively.
Click OK and OK, and the computer will build
a driver information database and will require a reboot for the changes to
take effect.
BoAFan116
4 Posts
0
September 22nd, 2003 02:00
BoAFan116
4 Posts
0
September 24th, 2003 00:00
micmaxe
740 Posts
0
September 24th, 2003 01:00
Ex-Ven
2 Posts
0
November 19th, 2004 22:00