Solution (1)
Accepted Solutions
Hi,
Dell has not tested XPS 730 with Windows 8. For more information on this you can check the link: http://dell.to/U7cW0Q First step you can try is to check in BIOS if the Integrated NIC is enabled by following the steps below:
- Restart the computer.
- As soon as you see the Dell logo, start tapping the ‘F2’ key on top of the keyboard.
- If you wait too long and the Microsoft Window appears, then continue to wait until you see the Windows desktop. Now shutdown your computer and try again.
- After this a new window would appear. You can only use the arrow keys of the keyboard to navigate between the options as the mouse is not functional in this mode.
- Navigate to 'Advance' tab, enable 'LAN0 controller' and 'LAN1controller'
- Press F10 to save settings.
- Press Esc to exit BIOS and restart your computer
Once the Integrated network card is enabled, you can install the driver for Ethernet controller from link: http://dell.to/ZRaDIf
Steps to download drivers:
- Click on “Download File”.
- Select “For Single File Download via Browser”.
- Click on “Download Now”.
- Save the driver on your desktop.
- Once the driver is downloaded on the desktop, right click on it and select “Run as administrator”.
- Follow the prompts on screen and restart your computer.
Please reply for further clarifications.
Hi,
Dell has not tested XPS 730 with Windows 8. For more information on this you can check the link: http://dell.to/U7cW0Q First step you can try is to check in BIOS if the Integrated NIC is enabled by following the steps below:
- Restart the computer.
- As soon as you see the Dell logo, start tapping the ‘F2’ key on top of the keyboard.
- If you wait too long and the Microsoft Window appears, then continue to wait until you see the Windows desktop. Now shutdown your computer and try again.
- After this a new window would appear. You can only use the arrow keys of the keyboard to navigate between the options as the mouse is not functional in this mode.
- Navigate to 'Advance' tab, enable 'LAN0 controller' and 'LAN1controller'
- Press F10 to save settings.
- Press Esc to exit BIOS and restart your computer
Once the Integrated network card is enabled, you can install the driver for Ethernet controller from link: http://dell.to/ZRaDIf
Steps to download drivers:
- Click on “Download File”.
- Select “For Single File Download via Browser”.
- Click on “Download Now”.
- Save the driver on your desktop.
- Once the driver is downloaded on the desktop, right click on it and select “Run as administrator”.
- Follow the prompts on screen and restart your computer.
Please reply for further clarifications.
