Unsolved
This post is more than 5 years old
3 Posts
0
45257
OID's for PowerConnect 62XX / 6224
Hi,
I require the CPU and Temperature OID's for a PowerConnect 62XX / 6224
Any help would be appreciated
Kind Regards
Russell
Unsolved
This post is more than 5 years old
3 Posts
0
45257
Hi,
I require the CPU and Temperature OID's for a PowerConnect 62XX / 6224
Any help would be appreciated
Kind Regards
Russell
Top
DELL-Victor
98 Posts
0
May 21st, 2009 12:00
Hello!
The Temperature OID's are not present for the current 62xx firmware (2.2.0.3), but will be included in the next set of firmware and MIB revisions, dubbed 3.0 due to come out by the end of June. Included is a new MIB called FASTPATH-BOXSERVICES-PRIVATE-MIB which will contain the OID .1.3.6.1.4.1.674.10895.5000.2..6132.1.1.43.1.8.1.4 for the temperature sensor reading.
I'm not able to locate CPU utilization and am looking further into the issue. If not present, I'll request the addition for the next MIB release.
Victor
RedRussell1980
3 Posts
0
May 22nd, 2009 05:00
Hi Victor,
Thank you for your prompt and concise response.
If you can get back to me regarding the CPU OID's that would be great.
Regards
Russell
DELL-Victor
98 Posts
0
May 22nd, 2009 14:00
The CPU Utilization OIDs for 62xx switches are
1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.4.1 (total free memory)
1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.4.2 (total memory)
1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.4.3 (Table for the following...)
1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.4.3.1.1 (Index)
1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.4.3.1.2 (Name of process using CPU)
1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.4.3.1.2 (% of CPU used by corresponding process)
Victor
wunderon
10 Posts
0
July 29th, 2010 11:00
PowerConnect 62xx rollup CPU is .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.4.4.0 ...
i.e. # snmpwalk -v 2c -c xxxxx 192.168.1.1 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.4.4.0
SNMPv2-SMI::enterprises.674.10895.5000.2.6132.1.1.1.1.4.4.0 = STRING: "5 Sec (19.68%), 1 Min (22.20%), 5 Min (21.82%)"