Unsolved
2 Posts
0
397
March 4th, 2022 07:00
Dell Optiplex 3080 SFF Hard Drive
Good Afternoon,
When building the Dell 3080 SFF devices using PXE / MDT we have found that this process fails with RAID Sata Operation mode enabled in the bios.
When disabling the Raid On mode in the bios and changing this to AHCI the device builds successfully and is recognised.
Post build the devices appear to be running slowly and in task manager it details the the SSD is a HDD.
Is there a way to convert the drive back to SSD now they have been built or will it need RAID to be turned back on and the storage controller driver injected into the MDT build image for a rebuild?
Any advice would be greatly appreciated.
Kind Regards
Ash
0 events found
No Events found!
DELL-Cares
Moderator
•
27.6K Posts
•
16 Points
0
March 4th, 2022 08:00
Hello, we see you are looking for assistance. Click our DELL-Cares username, on the right click, "Send this user a private message". Provide to us the private Dell PC Service Tag. If you need assistance finding your Service Tag, click here.
AshTPEL
2 Posts
0
March 21st, 2022 15:00
Thanks Service Tag sent via Direct Message.