Re: mounted the standard circular fan from the cooler on a 9010 DT. It went on fine, but the 9010 has a 4 wire, 5 pin I think it is called latch type connector. The 5050 board takes a 4 pin.
The 5 pin latch type connector is for Dell proprietary cpu or sometimes chassis fan. Your blower fan uses industry standard 4 pin. To use the Dell fan for your gpu, you need this Dell Fan 5-Pin Male to Standard PWM Fan 4-Pin Female Adapter Cable
(you connect Dell 5 pin latch connector to the socket of this adapter, then plug the 4 pin connector into your gpu)
JOcean
9 Legend
•
12.6K Posts
0
October 31st, 2022 06:00
Possibly something like this adapter available at MODDIY?
redxps630
9 Legend
•
15.4K Posts
0
October 31st, 2022 07:00
Re: mounted the standard circular fan from the cooler on a 9010 DT. It went on fine, but the 9010 has a 4 wire, 5 pin I think it is called latch type connector. The 5050 board takes a 4 pin.
The 5 pin latch type connector is for Dell proprietary cpu or sometimes chassis fan. Your blower fan uses industry standard 4 pin. To use the Dell fan for your gpu, you need this Dell Fan 5-Pin Male to Standard PWM Fan 4-Pin Female Adapter Cable
(you connect Dell 5 pin latch connector to the socket of this adapter, then plug the 4 pin connector into your gpu)
https://www.moddiy.com/products/Dell-Fan-5%252dPin-Male-to-Standard-PWM-Fan-4%252dPin-Female-Adapter-Cable.html?gclid=EAIaIQobChMIvsG6_c-K-wIViIjICh01bwDVEAQYAiABEgLQs_D_BwE