OK, hate bumping my own threads, but the problem is now solved. The board is putting out +3.3V on the third pin of the drives and they would not spin. I had to mask the third pin with electrical tape in order for them to work. That was all the issue.
manolo2001
2 Posts
0
March 4th, 2021 11:00
OK, hate bumping my own threads, but the problem is now solved. The board is putting out +3.3V on the third pin of the drives and they would not spin. I had to mask the third pin with electrical tape in order for them to work. That was all the issue.
Manolo