All of the boot settings are in the BIOS System Setup. You can set the boot order form there. USB boot devices are considered hard disks in the boot order. If the USB is not the first device in the boot order then you will need to enable Hard-Disk Failover.
Daniel My
10 Elder
•
6.2K Posts
0
February 12th, 2017 15:00
Hello
All of the boot settings are in the BIOS System Setup. You can set the boot order form there. USB boot devices are considered hard disks in the boot order. If the USB is not the first device in the boot order then you will need to enable Hard-Disk Failover.
www.dell.com/support/home/product-support/product/poweredge-r630/manuals
USB devices are not considered virtual media.
Thanks