Unsolved
This post is more than 5 years old
9 Posts
0
73661
August 1st, 2005 12:00
LSI Logic: MPT BOOT Rom, No supported Device Found
Hallo
I have SC1600. I unplugged power cable opened the box removed DVD player and placed it back. But when i started the box up again it cameup with:
1. Press CRT + A to start LSI Logic Config Util... if i ignore this it goes to 2.
2. Scanning for device at HBA 0; IDE ; LUN 0... then it goes to 3.
3. LSI Logic Corp. MPT Boot Rom; No supported Device Found...
Beyond this point the server does nothing and all I can do is to reset the Server
I have no Idea what to do could anyone help.
I have SC1600. I unplugged power cable opened the box removed DVD player and placed it back. But when i started the box up again it cameup with:
1. Press CRT + A to start LSI Logic Config Util... if i ignore this it goes to 2.
2. Scanning for device at HBA 0; IDE ; LUN 0... then it goes to 3.
3. LSI Logic Corp. MPT Boot Rom; No supported Device Found...
Beyond this point the server does nothing and all I can do is to reset the Server
I have no Idea what to do could anyone help.
0 events found
No Events found!
hoof
1 Message
0
September 20th, 2005 01:00
CorneliusMoster
9 Posts
0
September 20th, 2005 07:00
Hallo There!!
I got my problem fixed after a whole day of plugging stuf in and out.
I tested EVERYTHING!!!! but at the end of the day NOTHING was wrong!
I unplugged EVERYTHING: Floppy, CD, I mean EVERYTHING!! Rebooted a few times and then added one thing at a time and first JUST the HDD booted, then Floppy, etc.
I even tested OTHER equipment in my server, Thus at 1 stage i just had my motherboard in. I had other cables, memory, HDD, etc.
As i said at the end of the day nothing was wrong, my advice would be unplug EVERY THING and then start one by one.
If you think it might be your HDD you could buy SpinRight from www.grc.com it seems this guy know what he is doing.
Hope you get all working again.
________________________________________________________________
Forward to 2007 thing played up again!!!! The thing is the BIOS is 12A BUT it does not pick-up the HDDs or any IDE... It does pick-up the 1.44 Floppy drive though?? Dell diagnostics DO pick-up the IDE drives and all seems to be fine BUT THE BIOS or any other Dos boot disk does not see the IDE!!! I even tried reflashing the BIOS not joy!!!!
Message Edited by CorneliusMostert on 07-13-2007 05:58 AM
ravinderccs
4 Posts
0
August 12th, 2011 01:00
ur lsi card not working.you should refix and replace it
Dev Mgr
4 Operator
•
9.3K Posts
0
August 12th, 2011 11:00
This thread is 6 years old. It wouldn't surprise me if the original person no longer owns the server.