Unsolved
This post is more than 5 years old
1 Message
0
7443
Power Requirement for M1000e + 16 Blades
Hello Guys !
Can someone please help me out with the power requirement for a new M1000e Chassis with 16 blades.
Configuration is -
Chassis Info : "M1000e + 2700watts 6 PSU + 4* PowerEdge M I/O Aggregator, 56P, 10/40, for dual switch config (FI) 32 Port + 2 * Brocade M5424 24 ports FC8 Switch with 4 x SFP FC8" |
|
The above chassis will have 16 blades – and their config is - |
2 * Intel E5-2640 v4 2.4GHz,20M Cache,8.00GT/s QPI,Turbo,HT,10C/20T (85W) Max Mem 1866MHz |
1 * QLogic 57810-k Dual port 10Gb KR CNA Mezz |
DELL-Chris H
Moderator
Moderator
•
8.8K Posts
0
May 17th, 2017 07:00
TheAntz,
While we don't have the means to test the specific setup, I can tell you that the chassis alone draws 18.17amps, with an individual (average build) M600 drawing about.9 amp. So fully loaded that would be an additional 14.4 amps. So it would be about 32.57amps.
Hope this helps.
Solli
11 Posts
0
May 18th, 2017 02:00
Dell has a power calculator
http://www.dell.com/calc