Unsolved
This post is more than 5 years old
1 Rookie
•
9 Posts
0
15209
August 26th, 2015 06:00
PowerEdge 840 Tower Server, Perc 5/I Shows Non-Critical error on battery
In Open Manage the PERC 5/i Adapter show a yellow triangle with an exclamation mark in it It says NON-CRITICAL on the battery. The battery status shows the following:
Battery on Controller PERC 5/i Adapter
Properties
Name Battery 0
State Learning
Predicted Capacity Status Unknown
Learn State Active
Next Learn Time 79 days 5 hours
Maximum Learn Delay 7 days 0 hours
Battery Tasks No Task Available
Earlier this AM it showed up to date (I started another cycle) but the Triangle was still there. Is this cause for concern? Also, after the learning cycle, when everything shows its OK (like earlier) do I need to reboot the server for this to correct itself?
Please explain what I am seeing, why I am seeing it and how do I resolve it?
Daniel My
12 Elder
•
6.2K Posts
0
August 26th, 2015 14:00
Hello
The warning status should go away once the learn cycle completes. The learn cycle can take several days. If OpenManage does not change the status then it is an OpenManage reporting issue. You can try restarting the DSM services that run OMSA or restart the operating system to get it to update.
Thanks