This post is more than 5 years old
3 Posts
1
1616
May 16th, 2016 15:00
PowerEdge R410 Memory Upgrade
Hello,
I need to update my memories DELL R410 server, but information on the Internet is unclear. I can not find reliable information related to the maximum amount of memory that supports this server.
I need to install memories 128 GB (4 GB x16), and I would like to know the maximum frequency (1066 MHz or 1333 MHz). In some DELL documents specified to be 1066 MHz and in others that may be of 1333 and other documents specified that the maximum amount supported is 64GB.
It is possible a recommendation of memories from other manufacturers?
regards
DELL-Josh Cr
Moderator
•
9.5K Posts
1
May 16th, 2016 17:00
Hi,
16GB DIMM support was added in BIOS 1.1.5.
The memory speed of each channel depends on the memory configuration: – For single or dual-rank memory modules: • One memory module per channel supports up to 1333 MHz. • Two memory modules per channel supports up to 1067 MHz. – For quad-rank memory modules: • One memory module per channel supports up to 1067 MHz. • Two memory modules per channel are limited to 800 MHz, regardless of memory module speed.
memory population rules Page 120
martinmesa
3 Posts
1
May 17th, 2016 21:00
Thank you very much for your response has been very helpful for me
martinmesa
3 Posts
0
May 26th, 2016 21:00
Hello,
I followed his advice. When I consulted the seller DELL, he offers me a memory with a frequency above 1067 MHz. This is worrying because the technical details of the proposal does not match the data of maximum frequency you told me in his previous post.
Size (MB): 16384; Commodity: DIMM; Config: REGISTERED; Technology: DDR3L; Class: DUAL RANK; Speed (MHZ): 1600; ECC: ECC; Pin Number: 240; and, Voltage: 1.35V.