Additional Info:

From inside the iDRAC7 interface:  Hardware >> Front Panel

This is what I currently see:

However, I should see something like this:

Robert -

We tried options 1 & 2 -- no change.  Prior to trying option 3, my management wants to try option 4 first. 

Are there any instructions or guide on how to check/ reseat the LCD cables that I can reference?

Try the each of the following options. 1. Soft reset of the iDRAC (racadm racreset) and allow a few minutes for iDRAC to boot. 2. Drain Flea Power by shutting down the server and removing power cables. Press and hold the power button for 15 seconds. 3. Update the IDRAC firmware. Select appropriate link below: 4. Reseat the LCD cables

Thanks Robert -

Suggestion #4 -- Reseating the LCD cables -- did the trick.  Power has been restored to the front panel and the iDRAC7 interface (Hardware >> Front Panel)  looks like it should.

Hey Robert,

if the server is running , can we replace ? 

Any suggestion ?

Thanks