Unsolved
This post is more than 5 years old
1 Message
0
7063
July 20th, 2005 15:00
i2c Extension Cable for PowerEdge 2600
I just purchased the 1X2 drive cage w/backplane, part number 8K534 and I now need the part number for the i2c extension cable. This cable has three connectors (2) 24-pin and (1) 8-pin. Does anyone know the part number for this specific cable only?
No Events found!
warwizard55
720 Posts
0
July 22nd, 2005 20:00
I'll list several needed cables for the other readers.
6M427 Power cable runs from the main BP to the 1x2 bay or internal TBU
6M140 Planar to 1x6/2x3 BP Power Cable Assembly and Planar to 1x2 Backplane Cable Assembly
8X316 Planar to Backplane and 1x2 ESM Signal Cable Assembly, version 2
0H924 Planar to 1x2 Backplane SCSI 68Pin Round Data Cable
I do not find a specific RAID cable for using the 1x2 with a PCI SCSI or RAID controller card, but 39DMM is 20" long and may work. (it's for going to the MAIN BP from a SCSI or RAID card)