This post is more than 5 years old
18 Posts
0
3087
Dell PERC H710 Mini Embedded (Poweredge R410)
Hi All,
Recently purchase some addtional drives for my R420 which has a PERC H710 installed with 6GB SaS drives.
the drives which i have been supplied are
HGST
Ultrastar C10K1800
which are 12G SaS drives.
i assume that these will function at the fastest level that controller can provide as the spec sheet from HGST just says 12G but always assumed SaS like SATA will work with older controllers just at a lower speed.
thanks
Anonymous
5 Practitioner
5 Practitioner
•
274.2K Posts
1
February 1st, 2017 12:00
Hello.
A common speed of 6GB/s will be negotiated as supported by the controller interface. I do see so that the PERC Seies-9 controllers support speed of 12GB/s.
SHimmer45
18 Posts
0
February 2nd, 2017 00:00
thanks for the clarification :)