Unsolved
This post is more than 5 years old
29 Posts
0
2414
PE2950iii with sata HDD
Hi
I have doubt in PE2950iii server
Using Perc6i card will the 2950iii server support Raid5 in SATA HDD? Is there any specific Backplane need?
Regards
-----------
B.Akbar
raiddude
36 Posts
0
April 7th, 2009 14:00
No special requirements are needed for support. All you need is the SATA drives in the appropriate carriers. The PERC6/i supports Dell SAS and SATA disks for all RAID levels supported by the card (including RAID 5)