Unsolved
This post is more than 5 years old
3 Posts
0
4447
PowerEdge 1750 4/di RAID stop d7
Hi, i have Dell PowerEdge 1750 with no floppy and cd working. I add drivers (SCSI,) to Win2k3 image by NLite and setup, tried to setup another server with this drivers and simply apply the image, but in all cases have an stop error d7.
Maybe someone have such problem ?
Dev Mgr
9.3K Posts
0
April 28th, 2011 07:00
Which driver did you add to the image and which controller (PERC/SCSI) do you have in the server?
AGera
3 Posts
0
April 28th, 2011 07:00
this driver perc-cerc-w2k3-6.46.2.32-A05 (i also tried a4 and a3 drivers for that controller) controller perc 4/di (scsi)
AGera
3 Posts
0
April 28th, 2011 11:00
yep, some time ago. and yes, a configured raid. i tried to setup it from network, but have the same problem, when files are copied and install starts - stop error.
theflash1932
7 Technologist
7 Technologist
•
16.3K Posts
0
April 28th, 2011 11:00
Have you used nLite much before (just checking that it was slipstreamed properly)?
Did you configure RAID (CTRL-A or CTRL-M) BEFORE attempting to boot to the OS CD?