VRTX Shared PERC 8 and Multipath I/O

Mistamayor,

It sounds like the Shared Perc 8 Driver hasn't been loaded. If you look on page 26 on the deployment guide you linked, it is the step you do before configuring the multipathing. 

Let me know if you have loaded the driver.

@DELL-Chris H thanks for your feedback.

I am running Server 2016 

I did not find drivers for PERC 8  at Dell.com/drivers just firmware for Server 2016

However, Shared PERC 8 shows up in deivce manger and the installed for the PERC8 has driver version 6.805.3.0 while driver date is 3/15/2016

I would be glad if you could help.

Downloading one of the drivers for Server 2012R2 showed that the currently installed driver is newer than the update i was trying to install.

@DELL-Chris H thanks for the feedback

I did not find drivers for PERC 8  at Dell.com/drivers just firmware for Server 2016

However, Shared PERC 8 shows up in deivce manger and the installed for the PERC8 has driver version 6.805.3.0 while driver date is 3/15/2016

I would be glad if you could help.

Downloading one of the drivers for Server 2012R2 showed that the currently installed driver is newer than the update i was trying to install.

Hello,

I have the same problem no PERC 8 drivers for Windows 2016 / 2019. Could you put the correct link pls ? I find only firmware.

Best Regards Jaime 

Hello,

I fixed :  

Keep the drivers that the Operating System (2016 or 2019) automatically detects in the Blades, and configure MPIO as Showed in the url https://www.dropbox.com/s/k18br0311gnop9b/vrtx.png?dl=0