Unsolved
This post is more than 5 years old
70 Posts
0
862
Cannot connect to 1955 Drac module on IP
Hi,
I'm currently trying to connect to the drac module of a 1955 which has an IP set and also gets an IP from my DHCP server when I set it on DHCP mode.
I cannot telnet to it's port 443 and also not port 80, I cannot even ping it.
What would be the idea to fix this ?
Thanks,
Matt
YamakasY
70 Posts
0
January 31st, 2017 10:00
Hi,
That is not the problem, it's just the cards that are bad as shown everywhere.
I can ping it after some KVM reset but I can only ping it from one device, if I try to ping or access it from another device it starts to timeout.
It seems that it's all too heavy for those cards, I wonder also why this has never been fixed in the past as everyone seems to have problems with it.
I'm on the latest firmware and it doesn't fix it. The cards worked in the past, slow but they did but they seem to die quit slow but they do.
Anonymous
5 Practitioner
5 Practitioner
•
274.2K Posts
0
January 31st, 2017 10:00
Hello.
Review your network configuration and determine whether or not the said ports are blocked.