Dell PowerEdge T110 II Memory Upgrade Issue

Hi all,

Before I return the RAM here lies the specs:

Current server is as mentioned above.

Current RAM installed is 4GB (2x2GB) in correct slots. The RAM currently installed is:

M391B5773CH0-YH9 Samsung 2GB 1333Mhz DDR3 PC3-10600 Unbuffered ECC

And RAM wanting to install is 32GB (4x8GB). The RAM I am wanting to install is:

Micron MT18KSF1G72PZ-1G6E1HE PC3L-12800R DDR3 1600 8GB ECC REG 1RX4

A Crucial Scan suggested this: https://www.crucial.com/usa/en/scanview/D3B752EE31D926C3

No matter the configuration in the server RAM slots and suggestions on the web, the server never posts and the Numerical 1 on the front panel and the heartbeat looking led flashes Amber.

According to my research and knowledge this should work. Obviously I am here because it doesn't.

Any suggestions that I may have overlooked will be great!

Thank you all in advance!