I don't see the controller you are using mentioned in the post. If you need assistance with a controller issue then you should provide that information.
Most of our controllers will work with Windows native SAS drivers. I suspect you are using the S-130 controller since that is the only one I can think of that will not work with native drivers. If you are using the S130 you will need to slipstream those drivers into your image. The drivers can be found on the system support page.
theflash1932
9 Legend
•
16.3K Posts
0
January 7th, 2019 09:00
If you are using the S130, don't. Disable RAID in the BIOS and use the drives in AHCI/SATA mode. The S130 is garbage.
Daniel My
10 Elder
•
6.2K Posts
0
January 7th, 2019 09:00
Hello
I don't see the controller you are using mentioned in the post. If you need assistance with a controller issue then you should provide that information.
Most of our controllers will work with Windows native SAS drivers. I suspect you are using the S-130 controller since that is the only one I can think of that will not work with native drivers. If you are using the S130 you will need to slipstream those drivers into your image. The drivers can be found on the system support page.
http://www.dell.com/support/
http://www.dell.com/storagecontrollermanuals/
Thanks