Unsolved
This post is more than 5 years old
1 Message
0
117422
Failed Write DqDqs DIMM B2
Hi. PowerEdge R720. Firs start - message:
"Error: Memory initialization warning detected.
DDR3 Training Failure - FPT - Write Leveling DIMM B2
Memory Training Failure detected. Failed Write DqDqs DIMM B2"
What is it?
DELL-Daniel My
Moderator
Moderator
•
6.2K Posts
0
March 4th, 2015 11:00
Hello
If this is happening when you are turning the server on for the first time then you likely have a loose DIMM. I would suggest reseating all of the memory.
Training is when the controller(PCI, memory) negotiates/trains with the device to a method both can perform. Training errors are usually caused by failed devices or devices that are not properly powered or fully seated in the slot.
Thanks